Hi I have a KF Laser and when you put the lights on high beam I lose both high and low beam and am left with park lights only.
Has anbody had this problem or know where I could get a wiring diagram to have a look
it would be appreciated
Thanks
Stuart

Sounds like the combo relay. I would replace it before digging into wiring.

I'm not sure where to look for the relay under the dash or under the bonnet

I had this problem, it was the actual switch.. to fix all i did was 1: take off the steering wheel, then 2: take off the switch unit (unit has both the wiper and light stalks on it), got a used one from the wreckers put it all back together and it was good as new.

On another note i had the same thing happen on a hyundia excel and i pulled the switch apart and fixed it.. but i'd say just get one from the wreckers.. its way easier.

thanks