|
| Ghiaed1994 |
|
|||
|
EBXR8380 wrote: Ghiaed1994 wrote: Hey Guys, I was looking through some old street fors magazines and found a twin turbo EB xr8 in "Budget Builds". The guy was using twin VG30 turbos, bolted them on with standard engine no mods and was getting 237rwkw. He then got it dyno tuned and it jumped to 270rwkw. Now im not an expert but thats getting serious for the standard engine? he said that the issue was fuel pressure (using the standard gear). He also mounted his up high but the way im going to do it is more lower, he mentioned that down low there was an issue with oil? Toranaguy - i got the J3 chip, looking at injectors now - how big? Um who would that be ??? Lol... Reading the story was great, is it true with the standard engine the setup was roughly 240rwkw? how long did you have that running for and how reliable was it? Nath
_________________ 1994 ED Fairmont Ghia |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Ghiaed1994 wrote: EBXR8380 wrote: Ghiaed1994 wrote: Hey Guys, I was looking through some old street fors magazines and found a twin turbo EB xr8 in "Budget Builds". The guy was using twin VG30 turbos, bolted them on with standard engine no mods and was getting 237rwkw. He then got it dyno tuned and it jumped to 270rwkw. Now im not an expert but thats getting serious for the standard engine? he said that the issue was fuel pressure (using the standard gear). He also mounted his up high but the way im going to do it is more lower, he mentioned that down low there was an issue with oil? Toranaguy - i got the J3 chip, looking at injectors now - how big? Um who would that be ??? Lol... Reading the story was great, is it true with the standard engine the setup was roughly 240rwkw? how long did you have that running for and how reliable was it? Nath It run 270 rwkw for ages.. I blew a head gasket and purchased a Dart block from VPW.. Then things became MAY AS WELL !! The std clutch gave way after 5 years.. Kee[ in mind the VERY nervous T5 was behind it... May as meant I may as well buy TKO now.. Oh may as well fit twin plate NOW.. Ohh May as well fit bigger injectors NOW!! Oh may as well fit bigger turbo's NOW!! See what I mean... Believe it or not the Dart block run 370 rwkw with #5 injector connected to the idle speed control ECU output.. When sorted and tuned properly by Hitman at Race Soutions and new injectors due to #5 being burnt out !! We fitted [may as well!!] 85Lb injectors, two 044 bosch inline pumps.. To make 482 rwkw @ 16 Lb boost. 7.8 compression.... The limit was ignition strength !! Or it could have made more.. The plug gaps ar .022 to keep spark from blowing out!! It already has wasted spark and the strongest Bosch coils on the market.. The 5.0 block is resting in my back shed minus heads and inlet...Oh and water pump.. The water pump wasn't a may as well option !!! Did I mention a little stroker crank ??? Yes may as well !!! Btw the turbo's now are Precision T3/4 hybrids.. Much the same used on the group A Sierra RS500 X's 2...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
EBXR8380 -> That thing is a monster, well done dude!
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| Ghiaed1994 |
|
|||
|
......mate how much you think you can get out of it when the ignition is fixed?
_________________ 1994 ED Fairmont Ghia |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Ghiaed1994 wrote: ......mate how much you think you can get out of it when the ignition is fixed? The may as well is stopped at where it is now.. It wheel spins in top at in the dry now... Maybe fit good auto, LSD first... I guess close to 1000 fwh.p ?? Turbo's would be at there limit ...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| DA22LE |
|
|||
|
EBXR8380 wrote: Ghiaed1994 wrote: ......mate how much you think you can get out of it when the ignition is fixed? The may as well is stopped at where it is now.. It wheel spins in top at in the dry now... Maybe fit good auto, LSD first... I guess close to 1000 fwh.p ?? Turbo's would be at there limit ... I think it's time for a dyno day appearance eh Graeme???.....lol Good luck with the project Nath. Research will pay off in the long run. Good on you. Cheers Daz
_________________ BA XR8 Boss 260 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 5 guests |
