|
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
How do you adjust the timing on a EF XR8? do you need to bridge a wire like on my EB I6? I know how to use a timing light etc just need to know how to put it into base timing/diagnostic mode. Need urgent help. cheers
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| banarcus |
|
|||
|
You need to bridge the engine STI and GND together on the diagnostics plug. They are the top and bottom pins on the far left of the plug. Bridge the terminals and then start the car, it will do its thing and you will have a short time to get the timing before the ECu switches over to normal mode and out of diagnostics...
|
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
where is this plug you speak of?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| One Drone |
|
|||
|
If you can't get it to work, you don't have to get into diagnostics mode. What it does is keep your rpm at 1500. Have someone hold it at 1500 or adjust the idle screw so that you can do the timing.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| Sturmovik |
|
|||
|
{USERNAME} wrote: If you can't get it to work, you don't have to get into diagnostics mode. What it does is keep your rpm at 1500. Have someone hold it at 1500 or adjust the idle screw so that you can do the timing. Err wrong.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| millard455 |
|
|||
|
its the big white plug in the fuse pannel near your right knee when sitting in the driver seat.
far left top and bottom pins need to be connected to each other. i found it heaps easier to use a bit of 10amp wire with a spade terminal on each end.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
oh the diagnostic plug? lol easy. my mate wants to advance the timing on his EF XR8 to get a bit more go. he always runs 98 octane so we may be able to push it a bit
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| One Drone |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: If you can't get it to work, you don't have to get into diagnostics mode. What it does is keep your rpm at 1500. Have someone hold it at 1500 or adjust the idle screw so that you can do the timing. Err wrong. Ok. But can you elaborate?
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| banarcus |
|
|||
|
I'm sure he hit one of my posts with a Err no or a Err wrong or something too.
|
|||
| Top | |
|||
| Sturmovik |
|
|||
|
Its because the ignition timing is only at its base level when in the diagnostic mode.
At any other point the timing is variable, which you can see happening when you put a timing light on it when its not in diagnostic mode.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| One Drone |
|
|||
|
Excellent, cheers.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 14 guests |
