|
| lethal EA |
|
|||
|
The tag on the diff says 3.23. Are they good gears to use? Are they v8 gears or 6 cylinder cylinder? Is there a way to tell the difference between a v8 diff and a 6 cylinder anyway??
What are the v8 diff gears and 6 cylinder gears anyway?
_________________ Black ED Ghia |
|||
| Top | |
|||
| revhead |
|
||
|
I have a V8 ef auto with 3.23 diff I think it's just a stock ratio for for later e series 6 or 8 same as the X series auto's had stock 2.92. Although I may be wrong.
_________________ ef fairmont ghia 5.0L
|
||
| Top | |
||
| TROYMAN |
|
||
|
well from eb2 onwards the diffs for 6cyl and v8 are the same..(28 spline bw78 series)
3.23 is usually a 6 cyl ratio and the v8 is usually 3.27 .. |
||
| Top | |
||
| Krytox |
|
|||
|
a*** are no difference between 6's and 8's
Stock 6 Manual EF onwards have 3.23:1 Stock 6 Auto Wagons have 3.23:1 Most cars had 3.08:1 Some Fairmonts had 3.23:1 to balance out luxury economy and to cope with load. Ghia's ef2 had 3.45 I prefer 3.23:1 on my manual car, I've had 3.45, 3.08 I've found my motor provides enough torque and revs to suit the medium ratio, but not enough revs for 3.45 and above. Most people on here seem to prefer 3.73 with auto combination.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Scaffy |
|
|||
|
My series 1 EL XR8 came with 3.23s. Now has 3.7s and it's much livelier
_________________ Trickflow Street Heat top end kit, 70mm BBK TB & EGR, 24lb injectors, Underdrives & 3.73s: 275rwhp - 13.15@105mph NA / 12.37@116mph N20 |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
I think thr lanes/ltd 8's came with the 2.7 diff, thats what mine has anyway, all the other xr8 diff's ive heard of are 3.23
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| TROYMAN |
|
||
|
my diff came from a ed xr8 it is 3.27 and my old ebxr8 was also 3.27...
|
||
| Top | |
||
| Steady ED |
|
|||
|
i'd always been under the impression that 3.23s were a gear revision that was brought in with the EF, so EA-ED regardless of 6 or 8 had 3.27s. sort of like the bw 3.89 - 3.91s.
either way, there is no difference in the gears between 6 or 8 in regards to strength, if thats what you are implying?
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Trav 4.0 |
|
||
|
My EBII Fairmont Auto came with 3.23. Now 3.73.
_________________ EBII Fairmont = 206rwkw |
||
| Top | |
||
| fiend |
|
|||
|
Just to confuse the issue --- Or not -- Like KRYTOX said - Wagons and Utes and long wheel base LTD, Fairlanes, are more likely to have 3.23 (including LSD varieties)... 8 or 6. (I am talking the mid 90's E series here...)
A lot of the sedans, Fairmonts, GLi's, XR6's (EF series, sorry) are 3.45 over here in NZ. Previously to that the gear ratios were even taller -- 2.7 and 3.08 or some such? Confused much? |
|||
| Top | |
|||
| TROYMAN |
|
||
|
to confuse things alittle more!!
eb ghia 6 cyl has 3.23 lsd. afaik the only ones here to have 2.77 was the 3 speed auto ea and na fairlanes.. |
||
| Top | |
||
| Mad2 |
|
|||
|
TROYMAN wrote: to confuse things alittle more!! eb ghia 6 cyl has 3.23 lsd. afaik the only ones here to have 2.77 was the 3 speed auto ea and na fairlanes.. yep the ea 3.9 s i have, has the 2.77 as does the 3.9 ghia [both 3 sp auto's]. the 91 ghia had 3.23, the eb has 3.23 & the 88 wagoon has 2.92 |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
I should check the ratio of this ED I6 Ghia LSD i have here, i thought it was 3.27:1. Oh well. It is lsd, that much is certain.
 I know i have 3.27:1 in my EB Ghia, it's LSD was replaced with another good unit early last year by myself. The one i replaced was 3.27 also. But who know's if it was the original diff or not? The ED is an unknown, the EB Xr8's i have both seem to be 3.27's as well. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 80 guests |
