|
| huggiebear |
|
|||
|
anyone got any idea about if these all match up wire wise? i know the physical plug is different, but can i just swap plugs? does anyone have a wiring diagram? or will i have to just swap to an EF/EL ABS unit?
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
How about explaining what you're trying to do . . . .
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| huggiebear |
|
|||
|
EF conversion into the NC, its all been stripped, EF loom installed, but the NC uses external ECU where as EF/EL use internal ECU so i found out. so from what i have been told i have to either swap the complete unit to an EF/EL unit or leave it disconnected and run the brakes as if it doesnt have ABS
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
The modulator and ECU are the one unit in the EF/EL's, and there are two types of Bosch unit in them - Early EF, and late EF/EL.
Not sure if the wheel sensors work with the EB/ED Bendix unit and the later Bosch units - been covered here, can't remember if it was resolved.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| huggiebear |
|
|||
|
the rear sensors plug directly into the EF loom, so im assuming i have the one that does work with it, i think ill just leave it unplugged for now and use the brakes like a GLi falcon, old ABS setup never worked anyways, used to lock up the front left every time
|
|||
| Top | |
|||
| el_747 |
|
||
|
snap0964 wrote: The modulator and ECU are the one unit in the EF/EL's, and there are two types of Bosch unit in them - Early EF, and late EF/EL. Not sure if the wheel sensors work with the EB/ED Bendix unit and the later Bosch units - been covered here, can't remember if it was resolved. Rear EB/ED abs sensors will work on a EF/EL abs pump. You just need to change the front abs sensors and front rotors to EF/EL type. I got a genuine ford abs wiring if u want a copy just let me know Rick. |
||
| Top | |
||
| huggiebear |
|
|||
|
that would be awesome if you could supply me a copy,
could you email it to ricksutcliffe@hotmail.com BTW nice name 
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
