|
| XR6 Lewis |
|
||
|
Hey all tried pulling my door panel off my BA falcon due to an extremely slow power window. Read on here that its probably a bit of grease in the chain?
Anyway i undid the screws holding it in place and took out the screw holding the door handle in but i couldnt get the panel to budge. I didnt push too hard though because i didnt want to break anything  It did make a snap sound and come off a little bit, but i panicked and snapped it back on. Anyone know exactly how you get these things off?
|
||
| Top | |
||
| alfy |
|
|||
|
2 screws behind the silver armrest cover, one behind the interior door handle, a few around the edge of the door trim, and its clipped on so that snap sound is hopefully just the clips coming out of the door shell. the armrest cover should come off with a small flat head screwdriver.
hopew that helps, and sorry if i missed some screw locations lol
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| phatba |
|
||
|
which door is it?
|
||
| Top | |
||
| kelso |
|
||
|
If its the drivers door don't try and pull the electric mirror knob assembly out first, pull the door card off a small amount and disconnect the plug.
|
||
| Top | |
||
| kelso |
|
||
|
Also powdered graphite in the window channels works really well, i have done it on mine and had quick windows ever since.
|
||
| Top | |
||
| XR6 Lewis |
|
||
|
Thanks for the advice, i saw another thread up about similar thing so theres a good picture up there. Ill have to give it a try when i get a day off as its raining pretty hard right now and i don't wana get the inside of the car wet
. Basically what i needed to know is that the snapping sound is normal haha. Oh and its the front passenger side window
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
