Fordmods Logo

au motor into EB91 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: au motor into EB91
Posted: Sun Apr 18, 2010 6:19 pm 
Parts Gopher
Offline

Posts: 89

Joined: 20th May 2009

Ride: EB 91 now with mpfi

Location: wodonga
VIC, Australia

G'day guys
I have been searching and reading s**t of info over the last few days about engine transplants trying to come up with the simplest (worthwhile) conversion. I think I have read too much and now getting to the point where I cant make a choice.I have narrowed it down to the following 2 choices, which one of these 2 would be the better option.

EB91

1. AU motor / Bellhousing - EB T5 box- EL BBM - EL Loom - EL ECU
2. AU motor / Bellhousing - EB T5 box- EB intake - EB loom - EB ECU

Is there much real noticeable difference between EB multipoint intake and BBM's ?
Cheers
Top
 Profile  
 
 
 Post subject: Re: au motor into EB91
Posted: Sun Apr 18, 2010 6:27 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

or you can also go au motor with the el bbm, eb loom,el ecu, with slight mods to the manifold loom and the addition of a couple of wires
Top
 Profile  
 
 
 Post subject: Re: au motor into EB91
Posted: Sun Apr 18, 2010 11:23 pm 
Parts Gopher
Offline

Age: 44

Posts: 87

Joined: 7th Sep 2009

Location: melbourne
VIC, Australia

We just did this too. AU motor, AU bellhousing (EB BH would be just as good), EL BBM, EL Tickford ECU, 300kPa regulator...no chip, 1/4 mile runs 14.7.

 

_________________

Any man over the age of 26 that drives a car of less than 8 cylinders with a 0-100kph time greater than 7 seconds must consider himself a failure.

Top
 Profile  
 
 
 Post subject: Re: au motor into EB91
Posted: Mon Apr 19, 2010 8:14 am 
Parts Gopher
Offline

Posts: 89

Joined: 20th May 2009

Ride: EB 91 now with mpfi

Location: wodonga
VIC, Australia

hey mate
did you modify the eb loom or use the EL loom, doesnt a couple of bellhousing bolt holes not line up from EB T5 to AU?
cheers
Top
 Profile  
 
 
 Post subject: Re: au motor into EB91
Posted: Mon Apr 19, 2010 8:28 am 
Parts Gopher
Offline

Age: 44

Posts: 87

Joined: 7th Sep 2009

Location: melbourne
VIC, Australia

Its too much of a hassle to change to EL loom. All you need is to run a few wires (for BB solenoid , and thermo fans) from the engine bay and connect them to the appropriate pins on the computer plug. Should be links if you do a search. The eb BH fits fine, its just that the lower 2 bolts dont fit. For the BB you will also need to get the vac solenoid. It is located under the panel just above the washer bottle in EF EL models. the whole thing is pretty easy once you get started so dont be put off. you need to gring a small amount (a few mm) of metal off the front web of the AU sump, this can even be done with a file. see ya

 

_________________

Any man over the age of 26 that drives a car of less than 8 cylinders with a 0-100kph time greater than 7 seconds must consider himself a failure.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 85 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 9:34 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names