|
| provked |
|
||
|
i have a 351 w im building up as a cruiser/ fun car, not after anything too crazy but i just picked up a set of protoplines 180 heads. now just wondering what cams and manifold you guys suggegst for a nice street/ fun car, i dont want a massive converter and i already have 3.5 lsd 9 inch. running a C4 auto too.
Cheers in advance.
_________________ 05 BA futura wagon, dumped, 19s, limo tint ( now the wifes car! |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Assuming it's a roller motor ??
Similar cam specs to the crane 2031 or 2030 depending on rocker ratio.. With reasonably LSA it would be quite mild on a 351.. But with enough lift to let them heads breath..Should be a real torque-er in 351... http://www.trickflow.com/articles/stroker_2/ These flat tappet cams work well.. http://www.jegs.com/webapp/wcs/stores/s ... %257C0&N=0
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Nope it's flatty ebxr, of course there's nothing stopping him using a retro-roller.
Here's one of those new thumpr cams from comp. It's a roller in std base circle but I'm sure they'd do a reduced base for 5.0 rollers. It'd be a good cam if you want it to sound radical without being so. http://www.compperformancegroupstores.c ... ode=THMFW2 btw be sure to get it with a -9 suffix and use a 5.0 steel dizzy gear. If you want to stay flat tappet here's one... http://www.compperformancegroupstores.c ... e=FTCAMSXE |
||
| Top | |
||
| provked |
|
||
|
thanks boys, oh and pete i didt wanna keen bustin ya via pm, i been looking into your info and came across these heads for a reasonable price, so i reckon ill pick em up soon, got a h/e sump with the deal too, i have heard about these thumpr cams, my mate has one in his 400chev, ill check out the links thanks again
_________________ 05 BA futura wagon, dumped, 19s, limo tint ( now the wifes car! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
