|
| kezz |
|
||
|
Hi guys,
After having my temp gauge stop working last night I have discovered the wire on the temp gauge sender has come off. I've done some bush mechanics and masked taped it back on as an interim measure. Do I need to replace the sensor (as it seems to be working fine now) or is there some way to repair this in a more permanent way than masking tape? Cheers Kezz
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| Papa Smurf |
|
||
|
Jaycar, a female push on terminal, terminal wiring plug a pair of pliers and voila.
|
||
| Top | |
||
| kezz |
|
||
|
Thanks Papa Smurf,
Can you explain how it works? I'm sending the missus to Jaycar (she works close by) and need to brief her so she can explain if needed. Thanks Kezz
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| kezz |
|
||
|
Ok, finally getting onto this after being away for work. Just realised the flat blade on the sensor has broken off
 Is there anyway to salvage it or does it need a new sensor? Thanks guys.
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| xcbest |
|
||
|
could solder a piece of wire with a male terminal onto end of sender were terminal broke off
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 69 guests |