|
EDXR6-Poly |
|
|||
|
Anyone able to give me any advise on removing the paint from the rear spoiler on a ED XR6/8 being rubber and due to the paint being cracked would sanding it remove it without rubbing back too much or the rubber part of the spoiler? or would paint stripper melt the rubber?
Anyone have any ideas how to easily remove the paint? also its in great condition and no bubbles where the bolts are so im off to a good start
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
Top | |
XRfairmont67 |
|
|||
|
i redid one last year, same problems.
i used a random orbital sander with 80grit discs, then 180grit took around 2 hours to strip back to rubber. i would avoid stripper as it soaks into the rubber and will fry any paint applied afterwards |
|||
Top | |
EDXR6-Poly |
|
|||
|
No worries ill try that then cheers for the advise
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
Top | |
MoffatGhia |
|
||
|
has the rubber in your spoiler bulged at all?if it has, save yourself the trouble and get a fibreglass copy, the mount bolts in the original spoilers are only mild steel, which rusts, bulges the paint which then cracks
|
||
Top | |
EDXR6-Poly |
|
|||
|
no bulges nothing its in VGC apart from the paint cracking from when i removed it from the car and getting it ready to paint E3 poly green
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
Top | |
XRfairmont67 |
|
|||
|
here one i prepared earlier...
|
|||
Top | |
EDXR6-Poly |
|
|||
|
that looks F**king smick hope my whole car is like that in a few weeks lol with the EB-GT kit
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 41 guests |