|
| stoj79 |
|
||
|
No the other edelbrock i think its the victor jnr
_________________ EL Fairmont - GT steering wheel -3.45 lsd - superlows - white line sway bars - xr kit - au11 xr8 engine - 3500 convertor -BA XR8 leather interior - ltd woodgrain - di filippo extractors - trick flow track heat manifold - tfs1 camshaft - twin 2.5 inch system venom cats hooker mufflers - 187rwk |
||
| Top | |
||
| stavros68 |
|
||
|
Try and find the bottom and i'll sell you the top
|
||
| Top | |
||
| XR9UTE |
|
||
|
{USERNAME} wrote: No the other edelbrock i think its the victor jnr As far as I'm able to find, they are only making the performer copy. The RPM2 and Victor they don't make. btw you realise that the RPM2 upper must be used with the RPM2 lower because the ports are bigger than the old performer/rpm1 lower which are one and the same. The only thing you could do is port the performer lower to match. I believe the bolt pattern is slightly different but it's still useable. |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Not quite true. I know because when i was chasing an inlet gasket for between the upper and lower Rocket only had one for a Victor. It fitted perfectly, the ports are the same size and the bolt pattern is the same. The performer and Victor use studs to mount the upper, the RPM11 uses bolts. That seems to be the only difference as far as i can tell.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| XR9UTE |
|
||
|
That's interesting, I had a Victor and it's ports were much bigger than those of a performer.
|
||
| Top | |
||
| greg302 |
|
||
|
i can tell you now that the rpm11 and the victor have totally different bottoms. theres noway the gasket off a victor would would fit on the rpm11. And between the rpm and the rpm11 port size is different
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| XR9UTE |
|
||
|
Hey Greg,
I think what's happened with Bretts' experience is that rocket called it a victor gasket when in fact it was not. |
||
| Top | |
||
| greg302 |
|
||
|
Ay Pete
yer i reckon
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| YOUNGBOSS330 |
|
|||
|
Actually Matt your car is slower now than it was stock
_________________ And comin' off the line when the light turns green |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
Tou guys are probably right, Doesnt suprise me when it comes to rocket
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
