Fordmods Logo

Home » Forums » Fordmods Tech » Forced Induction Workshop

Removing fmic, xr6 turbo 

 

Page 1 of 1 [ 9 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
deano_413
 Post subject: Removing fmic, xr6 turbo
Posted: Fri Apr 23, 2010 9:25 pm 
Fordmods Newbie
Offline

Age: 33

Posts: 2

Joined: 5th Aug 2009

Ride: Ford Falcon Au

Location: Sunshine Coast
QLD, Australia
What would happen if you removed an xr6 turbo intercooler on a ba or bf and used the car for a while? Would it be bad? Cheers
Top
 Profile  
 
 
89.SVO
 Post subject: Re: Removing fmic, xr6 turbo
Posted: Fri Apr 23, 2010 9:59 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia
would it even run?
or just suck unfiltered air?
why do you wanna remove it?

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph
Top
 Profile  
 
 
104ord
 Post subject: Re: Removing fmic, xr6 turbo
Posted: Fri Apr 23, 2010 11:05 pm 
Getting Side Ways
Offline
User avatar

Posts: 670

Joined: 29th Nov 2007

Gallery: 1 images

Location: brisbane
QLD, Australia
would you bypass it or would you just pull it out??either way it is silly idea..... FAIL

 

_________________

if the bar aint bendin your just pretendin
Top
 Profile  
 
 
DormanAU
 Post subject: Re: Removing fmic, xr6 turbo
Posted: Sun Apr 25, 2010 9:10 pm 
Getting Side Ways
Offline

Age: 34

Posts: 584

Joined: 4th Apr 2010

Ride: AU falcon

Location: toongabbie
VIC, Australia
if you bypassed the cooler aka from the turbo straight to the throttle body should work in theoy.

 

_________________

Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks

Welcome to Toongabbie motorsports :P
Top
 Profile  
 
 
BEAR80
 Post subject: Re: Removing fmic, xr6 turbo
Posted: Sun Apr 25, 2010 9:51 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 683

Joined: 4th Mar 2010

Ride: BF Fairmont Ghia & TS Magna

Location: central coast
NSW, Australia
if you remove the intercooler it will run but one question needs to be asked what amount of boost are you running and remember charge air is hot so you car will loose some power and can create problems as your intake temps will be hotter if your car has a boost controller turn the boost down

cheers bear

 

_________________

I don't know what to write in here LOL
Bear's Build Thread
Top
 Profile  
 
 
Mr.Kiss
 Post subject: Re: Removing fmic, xr6 turbo
Posted: Mon Apr 26, 2010 11:15 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 886

Joined: 17th Aug 2005

Gallery: 24 images

Ride: VZ SS 6Ltr ute, Honda VFR800

Location: Melbourne
VIC, Australia
deano_413 wrote:
What would happen if you removed an xr6 turbo intercooler on a ba or bf and used the car for a while? Would it be bad? Cheers

"LOL"

If you just removed the cooler and left it at that you'd f**k your engine by sucking in unfiltered air, and blow your turbo as it would have no air resistance and make the turbo overspeed.....

 

_________________

My Cars
2006 VZ SS cammed 6Ltr ute 295rwkW
2004 BA XR6T - 290rwkW 12.5@113mph ( SOLD )
1996 EFII Fairmont - 130rwkW 15.5@91mph ( SOLD )
Top
 Profile  
 
 
104ord
 Post subject: Re: Removing fmic, xr6 turbo
Posted: Tue Apr 27, 2010 8:56 pm 
Getting Side Ways
Offline
User avatar

Posts: 670

Joined: 29th Nov 2007

Gallery: 1 images

Location: brisbane
QLD, Australia
and if you go directly from your turbo to your throttle body your boost control solanoid will more than likely question what is goin on and youll overboost

 

_________________

if the bar aint bendin your just pretendin
Top
 Profile  
 
 
deano_413
 Post subject: Re: Removing fmic, xr6 turbo
Posted: Wed Apr 28, 2010 5:44 pm 
Fordmods Newbie
Offline

Age: 33

Posts: 2

Joined: 5th Aug 2009

Ride: Ford Falcon Au

Location: Sunshine Coast
QLD, Australia
thought it would be bad, just wanted to know so i could keep the turbo on the dl. cheers guys
Top
 Profile  
 
 
Johnson stroker
 Post subject: Re: Removing fmic, xr6 turbo
Posted: Wed Apr 28, 2010 5:52 pm 
NSW Cruise Moderator
Offline
User avatar

Age: 46

Posts: 7338

Joined: 5th Nov 2004

Gallery: 12 images

Ride: TE50

Location: ɹǝpun uʍop
NSW, Australia
if your trying to go stealth, look at W2A coolers. No need for a big FMIC, Subaru Libery setups play well with falcon stuff.

 

_________________

Image

I have a car.
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 9 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » Forced Induction Workshop

Who is online

Users browsing this forum: No registered users and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 22, 2024 10:36 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names