Hi Guys,

I have just finished putting my car (03 BA ute) back together after installing a new torque converter, and now i cant start the damn thing. i have checked and swapped relays, and fuses, and still no dice.

It wont even crank, just the click of the relays. I cant hear the fuel pump either.

The first time i went to start it, the display showed what gear i was in, which was wrong due to me putting the gear select cable on the inhibitor incorrectly. that has been fixed up now, and is in the correct position, but now the display shows no gear in screen.

another thing, when keyed to "on" the engine light stays on, is that normal.

Have i fried my ECU?

Sounds like your batterys dead?? Im not sure with BA's but all the e series Ive owned, when the key is in the on position the engine light stays on untill the cars started . . .

Cheers
Grant

Hey mate, i have run a multi meter acrcross the battery terminals, and i havd 12.2 volts still running.

All other electrics work fine.

check that you have put all the wires back on the starter motor properly, i forgot to when i put in my gearbox. cheers

another thing that led me to believe the ecu is faulty is i can't connect to it with my scan tool anymore.

nevermind. I reset the ECU for 30 mins. All was good after that

Good ya got it sorted mate

Cheers
Grant