|
| Albino |
|
||
|
Have you checked that the rocker cover seal is correctly placed. Sometimes they bulge out when refitting the cover to the head especially at the rear where you cant see easily.
When replacing the tensioner I use teflon tape as used on household plumbing. A lot cheaper than buying a tube of silicone. Probably low risk, but I'm a bit cautious about putting silicone on the tensioner threads. Murphy's law ...sure as eggs, silicone will end up into the oil port that feeds the tensioner.
_________________ Any man over the age of 26 that drives a car of less than 8 cylinders with a 0-100kph time greater than 7 seconds must consider himself a failure. |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
yer ive checked the rocker cover its fine! the oil is coming from up towards the power steering pump and running down the block,
_________________ El XR6 Turbo |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
ok ive found where the oil is leaking from , its coming out of the timing chain tension bolt , so how do i fix this?
_________________ El XR6 Turbo |
|||
| Top | |
|||
| MadMatt |
|
|||
|
A new O ring from ford is a good idea...
_________________ Member Number 8804 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 86 guests |
