|
| nighlord1 |
|
||
|
Hi, any suggestions on how to remove a broken cylinder head bolt. I took off the exhaust manifold and noticed on of the outside bolts was missing the head.. please help....
|
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: Hi, any suggestions on how to remove a broken cylinder head bolt. I took off the exhaust manifold and noticed on of the outside bolts was missing the head.. please help.... is the head only broken off,if so take the manifold off and a pair of multigrips or similar will screw the shaft out,if broken near flush-drill and use a easy out.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| nighlord1 |
|
||
|
HI, ye just the head had broken off, and its flush.... what about using left hand drill bits, and wd40...
|
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: HI, ye just the head had broken off, and its flush.... what about using left hand drill bits, and wd40... maybe,they arnt that tight as a rule,but may be rusted in
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |