just after LED replacements for demister and arial buttons. did whole LED conversion yesterday and bulbs in both buttons are smaller then baby T5 LEDs. just wondering what to use to change them, thanks

stick a 3mm led in it and attach a resistor externally.

i bought monza T5 wedge globes from autobarn, straightened the wires coming out the plastic holder and the led and resistor slides straight out.
i removed the globes/holder from the switches and straightened the wires and removed them. i then refitted the leds into the switch globe holders , and refitted the wires the same as they were and put them back in.
easy enough job

okay i see, just got 2 of the left over ones i got, much better now, i also need a replacement for the globe holder for the demister as the bulb has been melted in there