|
| Falcon_92_EB |
|
||
|
how do i polish my thermostat housing with autosol? rag and rub away or microfibre cloth? there should be a tech doco on this to get the best results.
Cheers lukas |
||
| Top | |
||
| TROYMAN |
|
||
|
for best results the housing will need to be sanded super smooth with a few finer grades of sand paper, finishing with around 1000 grit,
then you need to rub the autosol into the alloy, after a few mins of hard rubbing, polish it off with a clean cloth.. |
||
| Top | |
||
| Falcon_92_EB |
|
||
|
saweet i will buy some sandpapers then
|
||
| Top | |
||
| XRfairmont67 |
|
|||
|
start off with 320 wet and dry, then 600w&d, then 800w&d, then 1200w&d, then1500w&d. the finer u can get the scratches the easier it will polish up. use good quality wet and dry 3M or norton if u can find it, it will last longer, and use lots of water.
i would first go over any casting marks with a file and make it smooth, saves sanding it. autosol is best used with an old cotton t-shirt or flannelette shirt |
|||
| Top | |
|||
| Steady ED |
|
|||
|
dude, theres a sticky in this forum.
ford-bodykits-f15/tech-diy-polishing-aluminum-other-bits-t19203.html?hilit=polishing
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| Falcon_92_EB |
|
||
|
OH shiet i used the search but i searched autosol thanks man
|
||
| Top | |
||
| scotty2611 |
|
|||
|
I would highly recommend a polish called PURPLE its the nuts guts, top stuff,
_________________ EB 2,Turbo EL Motor, Momo Wheel, Cam, Fuel preasure reg, LSD, Color coded boot garnish 17" wheels, Lowered, Shift kit, Slotted & cross Drilled Brakes, AU fuel injectors, & more to come |
|||
| Top | |
|||
| Matt_jew |
|
||
|
Purple is miles better then autosol.
_________________ {USERNAME} wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| scotty2611 |
|
|||
|
It even say's on the label that it is addictive,
And I would tell you never to polish part of a aluminum boat, as once you have done part of it, you have to do the rest, hahaha
_________________ EB 2,Turbo EL Motor, Momo Wheel, Cam, Fuel preasure reg, LSD, Color coded boot garnish 17" wheels, Lowered, Shift kit, Slotted & cross Drilled Brakes, AU fuel injectors, & more to come |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |
