|
| EF-MattyB |
|
|||
|
Hey all,
I am looking at getting a 200kw cam out of an XR8 (along with timing gear and springs), from my knowledge i THINK it should be able to work in a 175kw engine. But i just wanted to make sure. Thanks in advance Matt
_________________ 99 AU Fairlane Ghia V8 Black Leather, 19" ANZ 5+5's with 245/35 rubber |
|||
| Top | |
|||
| sd1800 |
|
||
|
It will work but IMO your better of just using a aftermarket cam.
TFS-1 perhaps?
_________________ Formerly LV XR5 Turbo, AU Fairmont Ghia V8 & EBII Fairmont I6. |
||
| Top | |
||
| EF-MattyB |
|
|||
|
Would i have to upgrade my rockers??? I have limited know how of the engine internals so please be nice...
_________________ 99 AU Fairlane Ghia V8 Black Leather, 19" ANZ 5+5's with 245/35 rubber |
|||
| Top | |
|||
| sd1800 |
|
||
|
Rockers will be fine but depending on the cam you might need to change Valve springs.
But now you mention it, change the rockers to 1.6/1.7 ratio while it's all apart. Will give it a extra kick. It depends on the profile of the cam to what rockers you choose to run. I am not too cluey about cam profiles e.t.c. I'm sure someone else can assist.
_________________ Formerly LV XR5 Turbo, AU Fairmont Ghia V8 & EBII Fairmont I6. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 63 guests |
