|
| Mako |
|
||
|
EDIT!!!
Ok guys i am after... EL Wood grain T bar handle carpeted kick panels chrome button handbrake handle Thanks! 
In grey 
off the list so far... Chrome door handles EL Wood grain door inserts (only, dont need whole door trim)
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
Last edited by Mako on Thu Apr 28, 2005 11:34 pm, edited 2 times in total. |
||
| Top | |
||
| arm79 |
|
|||
|
Ummm.... Which colour are you after.. Grey or Cuppa?
|
|||
| Top | |
|||
| arm79 |
|
|||
|
Well...
1. The front bar's are the same for the high series from EF to EL. Just for a Ghia you need to get different mouldings that stick onto the bar. So you could get it from any old wrecker. 2. You missed out on Brads.. But there are always more around. 3. Good luck finding them separate. No on in their right mind would, as you break the part that holds the insert to the door when you try and remove it from the trim. 4. Did have some, but not anymore. 5. May have some at home if your interested. |
|||
| Top | |
|||
| Mako |
|
||
|
arm79 wrote: Well...
1. The front bar's are the same for the high series from EF to EL. Just for a Ghia you need to get different mouldings that stick onto the bar. So you could get it from any old wrecker. 2. You missed out on Brads.. But there are always more around. 3. Good luck finding them separate. No on in their right mind would, as you break the part that holds the insert to the door when you try and remove it from the trim. 4. Did have some, but not anymore. 5. May have some at home if your interested. 1. ahh thanks for the info 3. yes as i am just finding out 
5. Absolutely! my email and messenger if that helps is mattmako at netspace dot net dot au
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| Mako |
|
||
|
bump... a few items off the list. and added one.
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| twirqurky |
|
||
|
My wreckers has a woodgrain handle for an auto, I can buy it for you if you want, dont know about price yet.
|
||
| Top | |
||
| Mako |
|
||
|
sounds good... price pending of course.
This is off an NL/EL right, as i think the F series has a diff woodgrain.
_________________ Regency Red EL Fairmont - PH4480 - 2.5" exhaust - High flow cat/muffler - K&N panel filter - Mandrel bent air intake - T series intake - wade 1604 cam - 98 EL XR6 ECU - Whiteline lows - 17" ROH RT's - Koni yellows - DBA Slotted's - Green Stuff pads
|
||
| Top | |
||
| twirqurky |
|
||
|
Was looking at it, it seems aftermarket. In awesome condition I can always check it out for you.
PM your mobile number so I can SMS the price on theday so know hether or not to buy it. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
