I have a eb gl falcon station wagon with the standard central locking system, i am about to fit a car alarm with central locking lines out. i have intergrated these kind of units with other after market c.l.u. but not to the genuine ford. can anyone assist me with some guidance. i also wish to fit a internal door lock switch on the dash ( as found in the fairmonts etc ) can some one guide me as to how to do this also.

thanks

The central locking has negative triggers, red/yellow wire and the orange/black wire i think one does up one does down, just tap the wires off the drivers door as it is a master controller.

The same for the switch, you will need a momentary on off on switch and a negative feed switched same as above.

i know this is an old post
I've looked elsewhere on here
i want to hook up the central locking switch on a pre Smartlock EB II
i have the switch but cant seem to work it out
any help or answers would be greatly appreciated

i know this is an old post
I've looked elsewhere on here
i want to hook up the central locking switch on a pre Smartlock EB II
i have the switch but cant seem to work it out
any help or answers would be greatly appreciated

The black wire from the factory switch goes to earth, the other wires are two pairs of two. One pair for lock and one for unlock. Pick up the two wires from the drivers door locking motor, and if it goes backwards swap the wires over.