|
jonathon |
|
|||
|
if i need to replace eather or both do they need to come from a xh ute?
cheers
_________________ Owning 1 of 84,847 ebII. |
|||
Top | |
jonathon |
|
|||
|
cheers
_________________ Owning 1 of 84,847 ebII. |
|||
Top | |
snap0964 |
|
|||
|
Find the blanking resistor (near the Airbag module, behind the fuse panel) pull it out and put it back in to it's plug.
The blanking resistor doesn't look the same as the EL PAB blanking one. Don't PM me - if I reply, it's via the applicable thread.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
jonathon |
|
|||
|
does any one have a phot of the blanking resistor?
_________________ Owning 1 of 84,847 ebII. |
|||
Top | |
snap0964 |
|
|||
|
ashcook wrote: Sorry snap For someone searching for the same info - You can't search PM's, but you can search threads.This is the reference sticky (use it !!!): ford-interior-f14/ef-el-airbag-system-ready-reference-t57569.html If you look at the ECU loom near the ECU, there are a couple of resistors/diodes which look similar to the XH blanking resistor taped to the loom a few inches from the ECU plug.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
jonathon |
|
|||
|
chers thanks for your help
_________________ Owning 1 of 84,847 ebII. |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 62 guests |