|
| 98hybrid |
|
||
|
Hi Fellas, a question for those who may have tried or know this.
Has anyone used a VCT camshaft in a standard AU?. It has better specs than a STD AU cam and is only slightly different to the HP cam. I mean cam only without the VCT. I guess it depends on the position of the keyway in relation to timing but they all run the same chain, so i think it would work?. Any Ideas?. Thanks. 98hybrid. |
||
| Top | |
||
| 98hybrid |
|
||
|
Hi guys, Have I got you stumped on this one?, I was certain someone would know the answer.
Thanks, 98hybrid |
||
| Top | |
||
| DormanAU |
|
||
|
i dunno maybe its never been done, give it to a whirl and let us know. personally i would then an aftermarket one would be better.
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| TROYMAN |
|
||
|
it wont work in a non vct engine as the front of the cam is different and the std cam gear wont bolt onto the vct cam..
and the vct cam gear wont fit into the std head.. |
||
| Top | |
||
| DormanAU |
|
||
|
i thought the front of the cam could be different as the vct use a torx bolt were std use a bolt.
just go the aftermarket one, would be a greater gain.
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
I have tried it when i removed my vct cam gear (disconnected the VCT) and replaced the vct timing gear with a AU intech standard cam gear and bolted up fine as long as you ust the intech cam gear and bolt
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| DormanAU |
|
||
|
Pretty sure troyman did the same but with an aftermarket veneer gear
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
ok yes well it worked only down side was that you couldnt change the cam timing as easily as vernier cam gear
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| cjh |
|
|||
|
EDXR6-Poly wrote: ok yes well it worked only down side was that you couldnt change the cam timing as easily as vernier cam gear What's it making at the wheels without the NOS?????????
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 117 guests |
