|
| Big Kev |
|
|||
|
Hi all,
I might be in the means of organising some serious work from jim mock not just cams or dev kits...something special  .... just wanted to know what people thought of the quality of their work and how the works been going after a few kms been put on it.....
Ive been speaking with Brendan mock and he seems really good....they certainly know their s**t but i havent had anywork done by them before so just after thoughts cheers Kev
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
| Top | |
|||
| jonbays |
|
||
|
I am a happy JMM customer. I just mail ordered gear but was impressed with the help that was available and the knowledge. If it a six cyl project talk to Brendan at JMM or Mark at ITS in Sydney. Both are knowledgeable trustworhty tuners and engine builders.
|
||
| Top | |
||
| Spider_GT |
|
|||
|
Go the Jim Mock for sure
|
|||
| Top | |
|||
| Waggin |
|
|||
|
About 2-3 years ago I had the Dev5a kit installed in my EF Wagon.
Quality of their work is good, the kit is reliable (apart from a couple of broken valve springs) performance is on par with expectations. Brendan and Jim both know the 4L's better than most people, so you're in safe hands. I always recomend shopping around before commiting, have a few words with Its Performance here in Sydney.
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [{DESCRIPTION}] |
|||
| Top | |
|||
| Casper |
|
|||
|
I trust no one else to work on my XR6, simple as that.
|
|||
| Top | |
|||
| Big Kev |
|
|||
|
cheers for all the info guys
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
| Top | |
|||
| Nicko |
|
|||
|
Brendan is good, he knows his stuff and doesnt f**k around, im not a fan of jim or his dyno tho
_________________ Nicko |
|||
| Top | |
|||
| USELESS |
|
||
|
Mate I dont recommend you go to JMM. You are in Canberra? I would recommend in Sydney ,Joe at Crescent motorsport.He is a fine gentleman and takes care of us forum members.On the other hand Autotech enginneering at Granville are also good at their work.I had my cam installed by Crescent and they were straight down the line. I was originally a bit reluctant to see autotech engineering at first but found them quite good as well. JMM motorsport has great products.Mail order them and get a good worshop to fit them/
_________________ 14.77 @92.71mph July 06 14.52@95.68mph July 07 14.241 96.7 MPH in a shoebox/taxi au ford wagon!!Bwahahah still cant believe it!!! |
||
| Top | |
||
| neil101 |
|
||
|
Have to disagree there, if you can go to JJM I would not many mechanics have experince dialing in cams on the I6 seen it happen before say no probs but not done properly and then your dissapointed I'm sure spider can back me up on this he's had this happen to him.
Neil
_________________ HSV I JUST BEAT ONE !
|
||
| Top | |
||
| fuzion |
|
||
|
Its much of a muchness.
Fact is JMM's cams are from Wade. So realistically if you got a custom grind from wade or crow you might even get the same output. No doubt their work quality is good, but the price of what work your getting done personally i dont think is justified. Mark from ITS Performance includes an engine rebuild with all his engine kits. Ive heard more bad then good from JMM, but ive also seen a lot of good as well. Personally i'd go mark's kits as engine rebuild, cleaned up engine or your own and looks much nicer and definately puts out what he says it does. Shop around as everyone else said.. if your still unsure what you want im sure everyone on here will give you an idea to what you can do for the money/power you want/spend. |
||
| Top | |
||
| 99 tonner |
|
|||
|
Id prefer to rebuid my engine rather than just add-on then i know it will take the punishment it deserves.
_________________ T402 ISX 500hp daily driver |
|||
| Top | |
|||
| loxxr6 |
|
|||
|
I am a happy JMM customer. I just mail ordered gear but was impressed with the help that was available and the knowledge. If it a six cyl project talk to Brendan at JMM or Mark at ITS in Sydney. Both are knowledgeable trustworhty tuners and engine builders.
I'd have to agree with Jonbays here. I too mail ordered my JMM gear. It doesn't hurt to shop round tho but at least with some of the guys that offer packages rather than just the cam, you know what result you'll get. |
|||
| Top | |
|||
| Big Kev |
|
|||
|
Yeah ive mainly been dealing with Mark from ITS Performance....just keeping my options open....
I will have t get a rebuild done for the work im wanting t undertake...that part is unavoidable 
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
| Top | |
|||
| USELESS |
|
||
|
{USERNAME} wrote: Have to disagree there, if you can go to JJM I would not many mechanics have experince dialing in cams on the I6 seen it happen before say no probs but not done properly and then your dissapointed I'm sure spider can back me up on this he's had this happen to him.
Neil Actually I think you are right.
_________________ 14.77 @92.71mph July 06 14.52@95.68mph July 07 14.241 96.7 MPH in a shoebox/taxi au ford wagon!!Bwahahah still cant believe it!!! |
||
| Top | |
||
| DMac |
|
||
Age: 38 Posts: 1372 Joined: 7th Nov 2004 Ride: Lancer Coupe Location: Southeastern suburbs, Melbourne |
{USERNAME} wrote: Hi all,
I might be in the means of organising some serious work from jim mock not just cams or dev kits...something special .... just wanted to know what people thought of the quality of their work and how the works been going after a few kms been put on it.....Ive been speaking with Brendan mock and he seems really good....they certainly know their s**t but i havent had anywork done by them before so just after thoughts cheers Kev I wanna know what your getting done |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 75 guests |
