Fordmods Logo

Diff centres 

 

Page 1 of 1 [ 4 posts ] 

 
 Post subject: Diff centres
Posted: Sat Jun 05, 2010 9:53 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 580

Joined: 9th Sep 2009

Ride: EF Falcon GLi

Location: ADELAIDE
SA, Australia

Hello again fordmodders, ive tried searching on here but came up with nothing, im changing diff gears so im looking at 4.1:1's
Ive read on here that EA - series 1 EB's have different casings, is that true and can it effect the crown and pinion clearance? will ANY borg warner crown and pinion fit? or do i need one that is diff spacific?
I also am looking at an LSD conversion so ill do it at the same time, does the LSD carrier need to be spacific to EBII ABS, or can it come from earlier or later models?
While im at it is there more i need to no be4 i buy the parts?
Any help will be appreciated, thanks guys in advance....please no pelican :lol:

 

_________________

Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake!
SHAKE AND BAKE

Top
 Profile  
 
 
 Post subject: Re: Diff centres
Posted: Tue Jun 08, 2010 2:06 pm 
Parts Gopher
Offline

Age: 35

Posts: 79

Joined: 24th May 2010

Ride: 2008 BFII Fairmont Ghia

Location: Greystanes, Western Sydney
NSW, Australia

you are already a pelican for wanting 4.11s unless you own a servo or its going to and from and on the drag/burnout strip. lol

 

_________________

Rocky AKA The Tractor- ED Gli head+cam 3.7 limo 2x15' subs - gone but not forgotten
RED-JET - BFII Fairmont Ghia - Under Construction...
Rambo - NCII Fairlane Ghia 5.0l - just a daily runaround...

Top
 Profile  
 
 
 Post subject: Re: Diff centres
Posted: Tue Jun 08, 2010 2:27 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 2425

Joined: 10th Mar 2007

Gallery: 27 images

Ride: 1995 EF Fairmont

Location: Auckland
New Zealand

Not 100% sure, but i think the early e-series (EA-EB1) were 25 spline 75 series diffs. EB2 and later e-series are 28 spline, 78 series diffs.

Rather than a LSD centre, i would seriously consider a Lokka. You would get the 2 wheel action you're probably after, with the bonus of not flogging out like LSD's tend to do over time.

There's a guy on Ebay who sells used diff gears for a fairly decent price, he should have 4.11's available i would think. I think a few guys on here have dealt with him before. LINK

 

_________________

Money Talks, But All Mine Ever Says Is Goodbye
EF Fairmont - EFF111 Build Thread

Top
 Profile  
 
 
 Post subject: Re: Diff centres
Posted: Tue Jun 08, 2010 2:40 pm 
Stock as a Rock
Offline
User avatar

Posts: 103

Joined: 7th Jul 2008

Location: perth
WA, Australia

From what i found on here awhile back, when i was chasing 3.45s, the 3.08 housing is apparently smaller than the 3.23-3.45 and apparently does not fit. The centre also has to have the right splines for your axle type which Kwikxr has explained :D

 

_________________

1995 EF Futura
Port and Polished 94DT Tickford Head - Crow valve springs - 68mm Throttle Body - Wade 1673
4499 Pacemakers - 2.5" exhaust - Ti J3 Chip - 2J1 Techedge Logger -EL Tickford 3.45LSD -
XR low springs - Boge Turbo Shocks - Front DBA slotted Rotors - BA ESS shifter - Shift Kit

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 67 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 16, 2024 10:49 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names