Hi all,

Wired up a shift light today (autometer stand alone light), i wired the Green signal wire from the shift light into the Pink wire coming from the 12 pin cluster block(pin 2), i wired the Black earth wire into the Black/Green stripe wire on the same block (pin 3), and i wired the Red power wire into the Red/Green stripe wire (pin 1).

It's my LTD cluster, so EA/ED High series wiring diagram was the one i used. So that means i used the 12 pin upper block of wires.

It's set to come on at 3000rpm, but nothing. Doesn't do anything!

Any ideas??