|
| EDXR6-Poly |
|
|||
|
 Hi guys Im looking for a aftermarket cam for my AU motor if its a regrind or billet ,(billets are rare but worth the ask) im after either of the following * A wade AU1645 * A wade AU1671 * Or if you have something similar but needs to be an AU falcon cam (or hybrid EL cam) To suit the 1.8:1 rocker ratio, willing to pay upto $250 for a regrind as its alot of hasle to get a AU cam out where I live (middle of the sticks in QLD) so thought id see if some one is willing to sell there cam and make a little money out of it *yes i have priced a cam through wade, and was $120 for deposit for cam and $151 for the regrind and a further $29 for postage (registered post) making a total of $300 so if I was able to get one that has been used and saves me the trouble of locating another AU stock cam. Any help would be great thanks, also if you have a stock cam or a regrind cam for sale let me know the specs and we will go from there..
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| The Panel Van Man |
|
||
|
I THINK I HAVE AN AU CAM OR CAN GET ONE. DO YOU CARE WHO GRINDS IT AS LONG AS IT HAS THOSE SPECS. REGARDS TPVM.
SALT IS FOR RACING ON. SAUCE IS FOR FISH & CHIPS.
_________________ SALT IS FOR RACING ON. SAUCE IS FOR FISH & CHIPS. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
