|
| TimmyA |
|
|||
|
Hi All...
Chasing a washer bottle with sensor in good nic... My sensor has decided that it wants to sink and not float anymore... I think it'll be easier to replace the whole bottle than to argue trying to get a sensor in or out... EA through to AU I think had the same bottle... Also someone with an EF or EL I need the right hand cluster plug but must come with at least 8 inches of loom... Post as always to NSW 2705... Thanks, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| tony.martin11 |
|
||
|
PM Sent
_________________ BANNED USER |
||
| Top | |
||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
Hey mate it is pritty easy getting the sensor plug out just use pointy nose pliers to undo the plastic screw and pull the sensor out alot easier than replacing the whole lot.
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| TimmyA |
|
|||
|
whole thing is held in with two tiny phillips screws though... which you would have to take out to remove the sensor anyway...
I haven't looked it yet... But depending on the hole size I might even yet replace with a jaycar replacement sensor... depends what a bottle will cost me... and what size the hole is that's already in the bottom of the tank... Replying now Tony... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
Just trying to think back when I did mine I cant remember and screws when I pulled mine out
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| TimmyA |
|
|||
|
yeah only two screws right at the top... 2 electrical plugs... 1 hose... only takes all of 30 secs to remove it... I'll find out the hole size anyway, might be easier to do that...
Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
Oh you are talking about the whole tank my bad I thought you meant the sensor was held in by 2 screws
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| tony.martin11 |
|
||
|
ashcook wrote: AUII/III as well mate. You will just need to find one out of a car with a high series or XR dash. or mid series too as futura are mid series..... 
_________________ BANNED USER |
||
| Top | |
||
| TimmyA |
|
|||
|
slo might onto something... I'll see what size the hole is first... might be more reliable with a brand new aftermarket sensor come think of it... rather than another second hand one
 I've sourced the plug... Will let you guys know what I decide with the washer tank... Cheers all, Timmy
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| BAWITHLOT |
|
||
|
I have an EA tank with sensor for $10 plus postage!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
