|
| EDXR6-Poly |
|
|||
|
Just been looking at these manifold insulators both for the inlet gasket and the BBM gasket, pics below of the two.
  LINK http://cgi.ebay.com.au/MANIFOLD-INSULATOR-suit-EF-BF-6-Cylinder-/400129273487?cmd=ViewItem&pt=AU_Car_Parts_Accessories&hash=item5d29902e8f And....  LINK http://cgi.ebay.com.au/COLD-AIR-INTAKE-MANIFOLD-INSULATOR-FORD-EA-AU-6-/400129273373?cmd=ViewItem&pt=AU_Car_Parts_Accessories&hash=item5d29902e1d If it will cool the intake temps it should help the car produce more power with a smoother power curve but is it worth the $250 -$300 Including the new cam and tuned by J3 chip on a dyno would it be worth it or not for the few Kw gain? just after peoples thoughts before I commit to buying it
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| tearlejc |
|
||
|
do a search on autospeed for phenolic spacers (not too sure on the spelling of phenolic -I think thats correct?) - they did an article on them a few years back and autospeed are generally quite thorough with testing to show gains etc...
_________________ 351 4V XB Coupe running LPG |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
Have read these but the thing is
*the manifold spacer upto a 5kw gain *BBM spacer another 5kw gain (increased torque but possibility of topend loss due to VE) for a 10rwkw gain over standard before a tune maybe worth it ? *has anyone used these and made any real results i.e worth the money?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| KWIKXR |
|
|||
|
"Fiend" on these forums, makes his own version of the phenolic spacer to go between manifold and head (shown in the last photo). Not sure on the cost of the units yet, but shoot him a PM and he'll let you know
 I don't think he actually had any before and after dyno results but he did do a hell of a lot of temperature testing. |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
Depends on what other mods have been done first. Depending on what you can get a head ported for in your local area, that might be a better way to spend $300 - 350 odd.
There's a joint near me in Hoppers crossing that did some port work for me for $30 a port on my mighty boy head, and they said that's the usual cost per port. Your getting a cam, but is the head stock? Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
Its been ported and debured already cost me $420 including freight to and from
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| Dansedgli |
|
||
|
I wouldnt spend $100 on that stuff let alone 300.
Its only 3kw. You wont feel the difference anywhere except your wallet. Werent you going to turbo the car? $300 will get you some water and oil lines or a cooler + piping. |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
Dansedgli wrote: I wouldnt spend $100 on that stuff let alone 300. Its only 3kw. You wont feel the difference anywhere except your wallet. Werent you going to turbo the car? $300 will get you some water and oil lines or a cooler + piping. Yes am going turbo was just considering the heat transfer due to boost?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| Troy |
|
||
|
but wouldnt you go log with boost
|
||
| Top | |
||
| xcabbi |
|
||
|
Troy wrote: but wouldnt you go log with boost Depends on how much you are chasing. BBM will be more than enough in a street application. |
||
| Top | |
||
| krisisdog |
|
|||
|
If you were going to ditch the BBM you'd get a plenum, you wouldnt put a log on there.
|
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
So it's got port work already. Do you have a 3.45 diff? If not, spend the money on a set of diff gears, better gains than a couple of KW at the engine i would be thinking.
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| DRHEMI |
|
|||
|
Won't work for a N/A..... Yes it works decreasing temp.
BBM runner is too long for N/A as it is, if you add one or either spacer you will increase the runner length.... You will also move the injectors further away from the head.... If it worked I would have it on my engine Money better spent ceramic coating bbm 
_________________ PROEF 13.46 @ 105.78mph - 1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 94 guests |
