|
| freexrider |
|
||
|
as all other ef and el owners would know, there isnt enough room to sit 6 x 9s in the parcel shelf come standard but i was wondering if it would hurt the car at all if i cut out the original speakers holes a bit to fit the 6 x 9s?
_________________
|
||
| Top | |
||
| frd906n |
|
||
|
I cut my holes bigger with a jig saw to fit me speakers, or another way to do it is to fit them in the wooden raisers you can buy from auto barn and just have it sitting over the factory hole
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| GetToTheGone |
|
|||
|
Or you can just not bother gettting s**t 6x9's
_________________ Current car 2011 FG XR6 Ute Limited Edition |
|||
| Top | |
|||
| ausedwagon |
|
|||
|
get some good speakers not 6x9's
_________________ {DESCRIPTION} |
|||
| Top | |
|||
| freexrider |
|
||
|
tell me exactly what is wrong with good quality 6x9s?
_________________
|
||
| Top | |
||
| Johnny C |
|
||
|
You use subs for bass.
Each set of speakers are ideally used for a different range of sound. So the speakers in the rear will be for mid to low range frequency. Fronts mid to high. then you have tweeters, the use of crossovers etc etc. So 6x9's really dont have to go in. Just a little bit more research is needed. edit : eerrr and before anyone says anything. I know this may be wrong but I'm not too far off the mark. Just no need to cut up the parcel shelf or fit those gay spacers. |
||
| Top | |
||
| freexrider |
|
||
|
i spose. 6x9s are for that little bit of bass for people that dont like the bass of a sub.
_________________
|
||
| Top | |
||
| phongus |
|
|||
|
I didn't have much trouble fitting 8" speakers on my parcel shelf...
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Johnny C |
|
||
|
phongus - did you put your speakers onto little risers and recarpet the shelf?
It looks like it, I may be wrong. Looks good either way. |
||
| Top | |
||
| phongus |
|
|||
|
{USERNAME} wrote: phongus - did you put your speakers onto little risers and recarpet the shelf? It looks like it, I may be wrong. Looks good either way. I built a whole new shelf and carpeted it. It sits on the parcel shelf held down by a couple of bolts. Here is the the build thread. ford-audio-visual-f5/seat-belt-blocking-speaker-set-up-new-install-pg3-t24001.html?hilit=7.5%20inch
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| TIAMO |
|
|||
|
If you're not serious about SQ get the 6x9's or better yet 7x10's as they are an all round speaker. Otherwise get some good splits up front, 6.5 2 ways up back and a decent sub with amp. Will sound soooo much clearer that way. Rear speakers are only a fill in, but you dont want them for bass. Get the best you can afford up front, and a bit of bass in the rear with a sub.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
