|
| OZBMX |
|
|||
|
G'day guy's my central locking seems to be up the wazzoo, it started playing up so far I've determined, 3 fualty actuaors.
any replaced, them, and one of the rear ones, is out of sync, it's unlocking when it should be locking, visa versa. Anywaycanybody sort of explain this, as from what I can tell the sytem, should automatically work itself out.  So seems like it's getting the wrong signal.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| tony.martin11 |
|
||
|
Swap these two wires: Yellow w/black stripe and Red w/yellow stripe, just swap them with each other as those tell it wether to lock or unlock.
_________________ BANNED USER |
||
| Top | |
||
| XRfairmont67 |
|
|||
|
with the rear actuator there is 2 positions the rod fits, one way it will work backwards the other is the correct hole
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
Plus the rears operate in reverse to the fronts - i.e. fronts extend (unlock, snipper up), backs retract, and vice versa.
Best to have all door trims off, disconnect actuators from linkages, and check their operation. Might then unplug them all electrically and connect one by one, test operating each. Then take it from there.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
i replaced my brother inlaws outer door handles in his ed with el ones, when i put the lock mechanism and actuators back in to the passenger rear door i put the rod in the wrong hole, it made that door unlock when the others locked and visa versa. i just removed the actuator and swapped the rod into the other hole and it fixed it, all locked and unlocked fine then.
was all working fine before we pulled it apart. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
{USERNAME} wrote: with the rear actuator there is 2 positions the rod fits, one way it will work backwards the other is the correct hole ah hell, I hope that's the problem. I'll check it tomorrow, cheers for the help
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| OZBMX |
|
|||
|
cheers guys it was the problem, I pulled it off looked and went, f**k, I see what your talking about, my mate was helping me to put it back together quickly and was having trouble getting the actuator back on, he must've tried removing it, hehe. ahwell all sorted
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
