I have for sale a fitting kit to mount a Powerdyne supercharger onto an EF or EL 4.0L I6 engine (able to fit an AU engine with some minor changes). Included is:
* Powerdyne supercharger bracket.
* 2x Powerdyne supercharger pulleys - 1x 2.9"(6psi) and 1x 2.7" (9psi).
* 1x idler post.
* 4x idler pulleys - 2 spares - 3 are metal and 1 is plastic.
* a spare Powerdyne internal impellor.
* Chip Torque chip tuned for EF XR6 4TBD ECU.
* Two bags of all the bolts and fittings that you need to mount the supercharger, and heaps of spares too!

Basically, this is everything you need to fit and get running a simple Powerdyne supercharger setup on an EF or EL model 4.0L I6 Falcon. All you need is to supply your own supercharger (can be purchased for cheap on eBay, especially imported from the USA) and get another idler post (available from CAPA, or easy enough to make your own alternative for cheaper).

Reason for sale, is that I have shifted my supercharger from an EF engine to an AU VCT setup and so these parts are redunant now.

{DESCRIPTION}

Uploaded with {DESCRIPTION}
{DESCRIPTION}

Uploaded with {DESCRIPTION}

$1,000.00 ono.

Still available. Open to offers.

Pickup can be arranged from Melbourne after 18 August, but deposit will need to be paid in advance (as I'm not going to bring over to Melbourne if there isn't a garanteed buyer).

Last bumped by twr7cx on Wed Aug 11, 2010 6:57 pm.