|
| eboost |
|
|||
|
Im chasing some pics and any information on fitting a turbo to an AU 4.0 lpg. Its a dual fuel car too. Who here has done this?
|
|||
| Top | |
|||
| eboost |
|
|||
|
anyone know what converters to use?
|
|||
| Top | |
|||
| Dansedgli |
|
||
|
The most common is using gas research throttle bodies and 2 impco B2 converters with a gas research spring kit.
Its pretty simple. The only tricky part is putting a balance line into the cooler piping so the converters increase their flow on boost. I usually cut the end off a bit of half inch tube on an angle so its like a scoop and stick that in the piping. |
||
| Top | |
||
| eboost |
|
|||
|
yeah i heard something about 1/2 inch pipe on a 45 degree angle.
Just rang impco and have been reccomended an E converter with a 425 mixer. This convertes has a boost reference im told. |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
some impco's don't like the sudden change of coming off boost, so if you do run one, make sure you run a BOV aswell.
but as dan said, the balance line is the key component to making it work.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| TURBOTAXI |
|
||
|
Hi There,
Yeah I have done it. A couple of times lol. there should be a build thread somewhere on AFF. Started in 2005 or 2006, finished in 2007. Been driving it since, has 222rwkw. Used a Landi Renzo SECSIC81SM+P converter - good for 300 fwhp N/A and ??? forced. Geoff from SNORT helped me to set up the balance pipe well, migged in a 1/2 - 3/4 inch pipe at 45 degree. see pic below. 
_________________ Turbo AU falcon LPG 222.5 RWKW. |
||
| Top | |
||
| eboost |
|
|||
|
{USERNAME} wrote: Hi There, Yeah I have done it. A couple of times lol. there should be a build thread somewhere on AFF. Started in 2005 or 2006, finished in 2007. Been driving it since, has 222rwkw. Used a Landi Renzo SECSIC81SM+P converter - good for 300 fwhp N/A and ??? forced. Geoff from SNORT helped me to set up the balance pipe well, migged in a 1/2 - 3/4 inch pipe at 45 degree. see pic below. cheers, thanks heaps for that! You wouldnt have a link to the AFF thread? |
|||
| Top | |
|||
| presto |
|
||
|
I used two B2 converters and an Impco 425 mixer
_________________ I will not eat oysters. I want my food dead. Not sick. Not wounded. Dead. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
