|
| Sturmovik |
|
|||
|
I tried pushing my EL the other day out of the garage and it was near impossible, and at the time I thought I could hear the rear brakes binding.
So ive pulled the calipers off and its still very hard to turn the axle forwards, and near impossible to turn it backwards. I then thought it might be the handbrake binding, but even without the discs on there theres still a massive amount of resitance. Car is obviously in Neutral, and theres way more resitance than my ED, which can be easily pushed around. Anyone have any ideas?
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Your EL has a LSD, and the ED doesn't ???
Might be to do with that ??
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Sturmovik |
|
|||
|
ED has LSD
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| Troy |
|
||
|
cant be in natural properly, lsd wouldnt have anything to do with it. i've pushed mine with flat tyres before, maybe you need to work out? lol
|
||
| Top | |
||
| snap0964 |
|
|||
|
Yep, best of luck with it.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Steady ED |
|
|||
|
auto vs manual?
isn't that the reason you are meant to only flat bed or reverse tow autos, because you are spinning up all the auto internals and clutches slipping and s**t but with no drive on the pump to provide fluid?
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| cjh |
|
|||
|
I have found with an auto when its cold, harder to push than when its warm to hot. Just a thought.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Sturmovik |
|
|||
|
Ive pushed around a 6t truck at work and it was easier than the XR8, so there is something seriously wrong here. Anyway ill drop the tailshaft and see if its the diff or the trans doing it.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| revhead |
|
||
|
You checked the rear brakes but are the front calipers holding ? Doesen't need a lot to make it hard to roll.
_________________ ef fairmont ghia 5.0L
|
||
| Top | |
||
| Sturmovik |
|
|||
|
Had the whole rear end jacked up and rear rotors removed, and the same resitance was in the axle when you try and turn it.
_________________ 1993 ED XR6 5speed Polynesian Green. Project car. |
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
possibly a sized bearing? or collapsed bearing will give a tight feel?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| cjh |
|
|||
|
How is the rear bush in the tranny????
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 88 guests |
