Hey guys...
I've got an AU fairlane, that up until recently had a parnell LPG setup on it..
Now, both gas and petrol were displyed on the main cluster and depending on what fuel you were using, that would be shown...
I removed the LPG setup, but, not all the wiring..
After removal of the tank and convertor, the fuel gauge only reads empty now..
How do I fix this..?
I need to see how much petrol is in there!!!

Cheers
kriis

I think you will need to trace your petrol gauge wiring to the place where the switch changes over to petrol or gas and join the wiring back together.The switch would have a wire from the gauge,a wire from the gas sender and a wire from the petrol sender,so you join the gauge wire to the petrol sender wire.I hope this makes sense and is of help to you.Cheers Kevman.

makes alot of sense..
thanks mate..
going to tackle this tomorrow!
cheers