|
| dumtef |
|
||
|
im currently running a wade 1004@122 and also a chiptorque chip, i was wondering what cam people would recommend that i get (i want to stay auto and know about the problems with running a stall) i would also be looking at a 3.45 diff just to get me off the mark a little quicker
_________________ EF Fairmont I6 Auto, Wade 1004 cam, Chiptorque, Extractors, 2.5" System, Shift Kit, XR Snorkle, Ultra Low Springs, 18" Advantek Rims |
||
| Top | |
||
| twr7cx |
|
|||
|
Why not talk to Wade? They might nmakje you a custom grind to suit your car!
|
|||
| Top | |
|||
| dumtef |
|
||
|
good idea, i was also thinking about talking to jmm and see how there cams go with automatics
_________________ EF Fairmont I6 Auto, Wade 1004 cam, Chiptorque, Extractors, 2.5" System, Shift Kit, XR Snorkle, Ultra Low Springs, 18" Advantek Rims |
||
| Top | |
||
| Smackdown |
|
|||
|
I'd be looking at crow cam's 2222519.
Its a stage 2 cam which uglybob is running in his car. I reckon its better than the 1004 wade version. Yes, bob does have an auto. http://www.crowcams.com.au/templates/Catalogue-Falcon6EA-AU-OHC.shtml here's the wade site: http://www.wadecams.com/
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| dumtef |
|
||
|
what about the crow 2222543 cam, am running a chip so it can be setup to run a bigger cam, and that cam says its power range is from 1800 - 5500rpm which sounds ideal for an auto, has anybody been on a dyno with the crow cams
_________________ EF Fairmont I6 Auto, Wade 1004 cam, Chiptorque, Extractors, 2.5" System, Shift Kit, XR Snorkle, Ultra Low Springs, 18" Advantek Rims |
||
| Top | |
||
| BigBlu |
|
||
|
To run a stage 3 in a auto u need new valve springs a stally and a tranny cooler.
_________________ There is no substitue for cubic inches! |
||
| Top | |
||
| Smackdown |
|
|||
|
dumtef wrote: what about the crow 2222543 cam, am running a chip so it can be setup to run a bigger cam, and that cam says its power range is from 1800 - 5500rpm which sounds ideal for an auto, has anybody been on a dyno with the crow cams
After the dyno day, i'll have been on it. I'll keep you posted.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
| Top | |
|||
| dumtef |
|
||
|
i will be getting new valve sprigns fitted, and a 2,500 stall, i already have a tranny cooler fitted due to the shift kit and i have decided on a wade 1521a cam, plus a vernier cam gear, then i just have to get the chiptorque reprogrammed and it shud be sweet
thanks for ur help every1
_________________ EF Fairmont I6 Auto, Wade 1004 cam, Chiptorque, Extractors, 2.5" System, Shift Kit, XR Snorkle, Ultra Low Springs, 18" Advantek Rims |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 52 guests |
