|
Iveco550 |
|
|||
|
Hey guys....how do you remove the front bar off an el xr6 to replace the head lights?
all my headlights are cracked so really need to replace them soon cause i think i may get defected if a copper sees it. Cheers
_________________ Your commodore has just as much torque as my wheel nutts |
|||
Top | |
XRfairmont67 |
|
|||
|
remove the front guard liners , front section at least so u can get to the 2x 10mm headed bolts that join the bar sides to the guard
remove the indicators, 1x screw each . where they sit there is a 13mm or 14mm nut holding the bar to the guard. remove the shroud on top of the grille section that goes to the radiator support panel, look down below the high beam and there's 2x 15mm? nuts each side holding it to the chassis rails then underneath there is a few screws holding the splash shield to the lower radiator support then 4x 10mm headed bolts hold the light frames to the radiator support panel and unplug the wiring the headlight clip into the frames have u bought new xr6/8 lamps yet? |
|||
Top | |
Iveco550 |
|
|||
|
thanks heaps for that mate .....yeh i got them last week and they are in mint condition
cheers heaps for that.
_________________ Your commodore has just as much torque as my wheel nutts |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 25 guests |