Fordmods Logo

how to get my EL off the line quicker 

 

Page 2 of 2 [ 24 posts ] Go to page Previous  1, 2

 
 Post subject: Re: how to get my EL off the line quicker
Posted: Sat Jul 31, 2010 1:35 am 
Getting Side Ways
Offline

Age: 36

Posts: 638

Joined: 16th Feb 2005

Ride: EA Turbo

Location: Melbourne
VIC, Australia

I've had 3.9's with alotta head work/cam etc and still used to get 450 outta a tank easy.

If you're going to get extractors/cam down the track i'd get a 2500 or 2800 RPM stally with lock up, cruising would be like normal, but launching it would be 100x better.

 

_________________

1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi

Top
 Profile  
 
 
 Post subject: Re: how to get my EL off the line quicker
Posted: Sat Jul 31, 2010 1:38 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

How about a Jato rocket???.....LOL...use the search thingy...heaps of posts done on it.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: how to get my EL off the line quicker
Posted: Sat Jul 31, 2010 8:28 am 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

SLO247 wrote:
dc_todd wrote:
Stall it up and unleash fury.


I Lol'd.


+1 :D

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: how to get my EL off the line quicker
Posted: Sat Jul 31, 2010 9:58 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 1775

Joined: 10th Jul 2007

Gallery: 8 images

Ride: BFII Turbo

Power: 253 rwkw

Location: Waurn Ponds
VIC, Australia

I noticed only a minor increase in fuel consumption going from 3.08 to 3.89s behind an auto, and thats only because my driving mix was 10% town 90% highway. Someone who does 50/50 I reckon would see better economy, because 3.89s dont use as much fuel around town under normal driving.

iirc there was a fella in the FS section selling a set of 3.7's for 200 bob just last week. For under a grand you could buy the gears, have them fitted, and have a speedo corrector installed with change for a few tanks of fuel that you will be burning up putting the foot down for the first few weeks as you enjoy how much better the car feels.

 

_________________

enough isn't enough

Top
 Profile  
 
 
 Post subject: Re: how to get my EL off the line quicker
Posted: Wed Aug 11, 2010 1:21 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 996

Joined: 26th Sep 2007

Gallery: 4 images

Ride: ED Fairmont Ghia

Location: Brisbane
QLD, Australia

freexrider wrote:
hey all, im driving an EL 6 and she is really boggy off the line but when it picks up revs it takes off pretty quick. basically stock with a 2.5" inch sports exhaust and a K&N panel filter. anybody have any ideas on how i could get her takin off faster?


Bet my ef that your ignition timing is out.

a falcon with 3.23s and Auto isnt fast off the mark but I wouldn't say "slow" mine gets off the line just fine, Most of the time if i stomp on it off the mark it spins the wheels. They arnt that bad. My ef is stock it pulls 100 in about 8 secs.

 

_________________

ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4!

Top
 Profile  
 
 
 Post subject: Re: how to get my EL off the line quicker
Posted: Wed Aug 11, 2010 1:39 pm 
Getting Side Ways
Offline

Age: 36

Posts: 2563

Joined: 19th Feb 2007

Gallery: 21 images

Ride: 98 EL Futura

Power: 199 rwkw

Location: Lilydale
VIC, Australia

I found when my diff was a 3.08, it was best to spins the wheels a little bit to get the revs up quicker.

 

_________________

EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come

Top
 Profile  
 
 
 Post subject: Re: how to get my EL off the line quicker
Posted: Wed Aug 11, 2010 5:07 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 996

Joined: 26th Sep 2007

Gallery: 4 images

Ride: ED Fairmont Ghia

Location: Brisbane
QLD, Australia

http://www.youtube.com/watch?v=j20_kgqHbyY

That's my ef , if your car is slower then that, something is wrong.

 

_________________

ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4!

Top
 Profile  
 
 
 Post subject: Re: how to get my EL off the line quicker
Posted: Wed Aug 11, 2010 5:39 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 996

Joined: 26th Sep 2007

Gallery: 4 images

Ride: ED Fairmont Ghia

Location: Brisbane
QLD, Australia

uniacidz wrote:
ouch you poor thing


lol I know, I wasn't missing my eb until recently... Starting to get the I want power again bug.
My EB was 0-100 in under 6 Seconds EF is 8 seconds :(

 

_________________

ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4!

Top
 Profile  
 
 
 Post subject: Re: how to get my EL off the line quicker
Posted: Fri Aug 13, 2010 12:17 am 
Getting Side Ways
Offline
User avatar

Posts: 6432

Joined: 5th Nov 2004

Gallery: 6 images

If you have enough budget then you can turbo it. That's the best bang for buck and the only way you can really giggle like a little school girl when she hits boost.

 

_________________

5.6L of carbon footprint.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 24 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 71 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 12:36 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names