id say anything.

someone alway tries and does this thread but it comes down to people being stuffed trying to upload there pic, which is a lost cause for me.

someone alway tries and does this thread but it comes down to people being stuffed trying to upload there pic, which is a lost cause for me.

Cheers

caa will have some good examples of systems for you...

I know this is an ED, but the boot layout is similar.

http://www.fordmods.com/forums/viewtopi ... om+sub+box

this is mine.
http://www.PictureTrail.com/jbghia

Noice! How did you do that to the parcel shelf??

hey fellas
ill try and get a digital camera and take a photo of my boot install..
i got a few pic on my phone but doesnt take the best ones at night time.. :<
i got a not bad setup in me boot as below says.. with plenty o boot room still

Amp and cap, yet to sort out where the cap is gonna go/wiring. The amp is finalised, and all wiring is well hidden. I have a few wires running off that cap, Amp, 12V lighter socket, and of course input from battery. I've got a homemade low voltage cutoff circuit to add in soon as well. So I'll tidy up real soon nowâ„¢


2x 10" in seperate sealed boxes with banana plug leads, very handy as I can remove them quickly when I need the boot space. Which is frequently enough to not hard mount the boxes, but infrequently enough to mean I'm not 100% happy with them (not that they slide around any).

No pics:
- Sony 4x45W MP3/VCD headunit, but no screen. I'll upgrade to a DVD capable unit and add screens some day.
- Stock 6" replaced with some TOTL Sony 3-way 6" coaxials. The fronts hide nicely behind the grills in the door panels, and the rear ones are behind sony grills, as I managed to really f**k up the stock pioneer ones getting them out. I guess they were sun damaged as they were very brittle.

XRated:
The rear shelf is made of MDF and body filler. i used layers of mdf to build up areas and then smothed off corners with body filler. to get the window curves correct, i cut up the stock parcel shelf and stapled it to the new mdf shelf(while in car). then removed the lot and trimmed it in a layer of dacron and then orange material. chucked on an alpine logo. and it was done. really easy, just took a bit of time.

hope that explains.
cheers, JB

i custom made both of my boxes so they sit write up against my back seats and sit and straight under my parcel shelf to maximis my boot space. then i have a false wall across the back which i have bolted my amp to.

front view
http://www.fordmods.com/forums/gallery. ... f=2116&m=0

rear view
http://www.fordmods.com/forums/gallery. ... &cart=bono

thanks to azza for letting me copy his idea.