|
| plper1 |
|
||
|
Hey guys
I have a few questions about upgrading my injectors. Q1. What are the differences between injectors in an EL XR6 and a BA XT or even an XR6T? Q2 Are they interchangable? Q3 What injectors are recommended if I wanted to go forced induction in the future chasing about 300-350rwkW? Cheers in advance |
||
| Top | |
||
| Snort Performance |
|
|||
|
el injectors are around 19-20lbs - ba injectors are around 29lbs ( n/a ) with the turbo model the run higher pressure regulator
they fit but without ecu mod will run way too rich , for 300-350rwkw i suggest 60lbs leaves plenty of fuel if you decide to push bigger numbers
_________________ Snort Snort, we make our own speed!!!!! |
|||
| Top | |
|||
| plper1 |
|
||
|
{USERNAME} wrote: el injectors are around 19-20lbs - ba injectors are around 29lbs ( n/a ) with the turbo model the run higher pressure regulator they fit but without ecu mod will run way too rich , for 300-350rwkw i suggest 60lbs leaves plenty of fuel if you decide to push bigger numbers So I can install BA injectors into my EL without any problems? but what your saying is that even though the increase from 20 to 29lb, me car would run for too rich without an aftermarket ECU or a tune? would I then be able to use AU injectors for the time being until I do the turbo? |
||
| Top | |
||
| Snort Performance |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: el injectors are around 19-20lbs - ba injectors are around 29lbs ( n/a ) with the turbo model the run higher pressure regulator they fit but without ecu mod will run way too rich , for 300-350rwkw i suggest 60lbs leaves plenty of fuel if you decide to push bigger numbers So I can install BA injectors into my EL without any problems? but what your saying is that even though the increase from 20 to 29lb, me car would run for too rich without an aftermarket ECU or a tune? would I then be able to use AU injectors for the time being until I do the turbo? yes they fit but require remapping the ecu , au injectors will work without ecu modification
_________________ Snort Snort, we make our own speed!!!!! |
|||
| Top | |
|||
| plper1 |
|
||
|
thank you very much
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
I wouldn't go under 36Lb with forced induction though..
If its a V8 injectors and maf can be purchased...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| plper1 |
|
||
|
yeah at this point i am not getting a turbo, but i will much later down the track
but thanks anyway |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
