|
| TROYMAN |
|
||
|
i got mine from peps at hoxton park.. from memory it was about $80..
any auto shop that supplies painting stuff or a auto paint supplier should sell them... |
||
| Top | |
||
| fairlane6970 |
|
|||
|
best of luck with the build coupla mates had XC's one was a factory kermit green - not recommended - the other was a coupe he painted in Brand H permanent red (cherry red sorta) made the cover of Street & Custom way back when, but colour is personal but not that beige / sand colour pls!
_________________
Last edited by fairlane6970 on Mon Mar 01, 2010 10:46 am, edited 1 time in total. |
|||
| Top | |
|||
| bradley4567 |
|
||
|
fairlane6970 wrote: best of luck with the build coupla mates had XC's one was a factory kermit green - not recommended - the other was a coupe he painted in Brand H permanent red (cheery red sorta) made the cover of Street & Custom way back when, but colour is personal but not that beige / sand colour pls! thanks man, im in the process of buying a new floor pan to replace the current one, debate, keep the bench seat and column shift auto or take out and console + floor shift in also keep the 250 x-flow or stick in a 302 or 351 and the paint is going to be white period, just cant decide if i want a pearl, glitter whatever through it lols.
_________________ ef falcon daily driver |
||
| Top | |
||
| fairlane6970 |
|
|||
|
Gotta tell you when i saw the bench seat i thought how cool the old bench that's trick - no-one has a bench anymore keep it dude be a non conformist, as far as pearls go Lexus has a nice white pearl in the current range that is very nice without being too outlandish.
_________________
|
|||
| Top | |
|||
| bradley4567 |
|
||
|
fairlane6970 wrote: Gotta tell you when i saw the bench seat i thought how cool the old bench that's trick - no-one has a bench anymore keep it dude be a non conformist, as far as pearls go Lexus has a nice white pearl in the current range that is very nice without being too outlandish. I think I might keep the bench actually after ripping the bench out of my previous car. Within the next few weeks I'll get the floor pan from rare spares it's only going to costabout 300 dollars I was surprised actually
_________________ ef falcon daily driver |
||
| Top | |
||
| bradley4567 |
|
||
|
well apparently i only need the front passengers side floor pan so i will pick that up for 75 from rare spares,
while that is getting done i will be taking the front bench seat somewhere to get re upholstered, i was thinking either black or white, does anyone know of a good, cheap place to get it done? around the Sydney area?
_________________ ef falcon daily driver |
||
| Top | |
||
| Matt_jew |
|
||
|
bradley4567 wrote: well apparently i only need the front passengers side floor pan so i will pick that up for 75 from rare spares, while that is getting done i will be taking the front bench seat somewhere to get re upholstered, i was thinking either black or white, does anyone know of a good, cheap place to get it done? around the Sydney area? I shall sing his praises again. Jim at M&W motor trimmers in Peachtree Road Penrith.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| XR-Lane |
|
|||
|
Hey mate.
Nice project, Im keen to see how you go with this one  Also I have cleaned your first page where you where trying to post pics.By the way 351C FTW  Cheers |
|||
| Top | |
|||
| bradley4567 |
|
||
|
XR-Lane wrote: Hey mate. Nice project, Im keen to see how you go with this one Also I have cleaned your first page where you where trying to post pics.By the way 351C FTW Cheers ta mate
_________________ ef falcon daily driver |
||
| Top | |
||
| bradley4567 |
|
||
|
along the lines of progress i could be obtaining a v8 soon from an nc, how would i go about fitting this to the xc??
_________________ ef falcon daily driver |
||
| Top | |
||
| TickXR |
|
|||
|
It can be done but you will need to graft in the wiring loom out of NC into your car as these motors AND gearboxes are computer controlled
If your on a tight budget (which sounds like you are) then i would personally steer away from this option as it can get quite expensive, especially if your not a wiz with soldering irons and electrical schematics Plus a carbied cleveland V8 sounds SO much tougher than a standard EFI'd weezer imo 
_________________ If you don't do it whilst your livin, you aint got no bloody chance when your dead!!! |
|||
| Top | |
|||
| bradley4567 |
|
||
|
drivers side guard will need replacing or cut and weld with a repro panel
 passenger side is good 
_________________ ef falcon daily driver |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
