|
| 94edfutura |
|
|||
|
Does the BF shifter and surrounding fit into ba?
|
|||
| Top | |
|||
| arm79 |
|
|||
|
Why? They are exactly the same arent they?
|
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I think he is talking about the 6 speed shifter. By memory i dont think it fits.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| arm79 |
|
|||
|
I assumed that as well, I was waiting for him to come back being more specific...
Assuming is bad sometimes though. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
If you are talking 6 spd shifter into 4 speed, it's will be far from a straight swap, but if you were keen enough, you could make it happen i reckon.
If you're just talking 4 spd to 4spd, eg maybe a leather xr one, then straight swap.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| twase |
|
|||
|
I have seen both and I can't see any mechanical reason why not, there could be electrical reasons why not though. I assume that because the 6 speed was an option on BF then it would make sense the shifter mechanism was the same between 4 speed and 6 speed. I have seen enay listings suggesting the 6 speed shifter also fits BA.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
The 6 speed auto shifter is totally different. The 4 speed auto handle uses a pull up type system to change gears and the 6 speed one uses a push down type. The actual mechanism is different and the shifter plus surround.
|
||
| Top | |
||
| XR290 |
|
||
|
Hi,
Mechanically the ZF Shifter is the same and will be a clean fit into the BA shifter spot (Simply remove bottom assembly, as the BF centre console is higher). The electronics are different and so is the gearbox cable, has bigger end connectors, so the BA gearbox cable will NOT fit the ZF shifter. I am currently working on a MOD for this, and only have the gearbox cable to convert. Shifter works fine as I have made a conversion circuit board with the BA electronics to fit the ZF shifter surround. Keeping the ZF shifter gear position lighting. When I finish, I’ll post step by step instructions. |
||
| Top | |
||
| jpm600 |
|
||
|
{USERNAME} wrote: Hi, Mechanically the ZF Shifter is the same and will be a clean fit into the BA shifter spot (Simply remove bottom assembly, as the BF centre console is higher). The electronics are different and so is the gearbox cable, has bigger end connectors, so the BA gearbox cable will NOT fit the ZF shifter. I am currently working on a MOD for this, and only have the gearbox cable to convert. Shifter works fine as I have made a conversion circuit board with the BA electronics to fit the ZF shifter surround. Keeping the ZF shifter gear position lighting. When I finish, I’ll post step by step instructions. Old thread, But any chance you got this finished? I've got a Bf shifter and trying to work out if it's worth trying to use it. Any info would be great. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |
