Fordmods Logo

Manual EB soon. What do I need to know? 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: Manual EB soon. What do I need to know?
Posted: Mon Sep 27, 2010 1:11 am 
Smokin em up
Offline

Age: 39

Posts: 251

Joined: 1st Jul 2006

Ride: EBII Fairmont 4.0 206rwkw

Location: Adelaide
SA, Australia

Hey guys. Im putting a T5 in my EB 6 soonish after securing a box & bits.

I just want to hear from people what recomendations you have for a suitable clutch and shifter to suit my application. Currently my EB 4.0 makes about 160rwkw with the bigger stalled auto.

And any other info you feel I might need.

Cheers, Trav.

 

_________________

EBII Fairmont = 206rwkw
EL Fairmont = Daily

Top
 Profile  
 
 
 Post subject: Re: Manual EB soon. What do I need to know?
Posted: Mon Sep 27, 2010 1:36 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

Trav 4.0 wrote:
Hey guys. Im putting a T5 in my EB 6 soonish after securing a box & bits.

I just want to hear from people what recomendations you have for a suitable clutch and shifter to suit my application. Currently my EB 4.0 makes about 160rwkw with the bigger stalled auto.

And any other info you feel I might need.

Cheers, Trav.


Forget the early (ea & eb1) 3bolt flywheel & clutch setup. Go for a 6bolt flywheel (eb2 to au) with at least a clutch industries (aka PBR) RPM kit or similar. I have the RPM kit with the stock clutch plate in my EB Ghia, find it does great, hardly slips even when towing 2.5ton behind the Ghia. I don't have quite as much power as you tho. I would also fit up a billet retainer before the box goes in, and new seals as well, to make sure it doesn't leak on you when you put it in.

Check out the clutch fork, if you can pull the hook where the cable hooks on "back n forth" in the end of the fork, replace it with a new one, it shouldn't move at all. Also replace the shim that goes under the pivot bolt, the Au falcon part is still available & fits nicely in the older boxes.

Cheers

ToranaGuy

 

_________________

I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts|

Top
 Profile  
 
 
 Post subject: Re: Manual EB soon. What do I need to know?
Posted: Mon Sep 27, 2010 11:45 am 
Smokin em up
Offline
User avatar

Age: 34

Posts: 236

Joined: 4th Jan 2009

Ride: ED XR6, AUII XR8

Location: Melbourne
VIC, Australia

I do not recommend getting a clutch industries clutch. The one i had had a terrible pedal feel, it soprta felt like there was a lump half way through the travel. I'm not sure if they're all like that but mine was. I have an Xtreme clutch now which has a nice smooth travel and has no trouble dealing with my engine which isn't stock.

 

_________________

ED XR6, LeMans Red, 5-Speed
AUII XR8, Silhouette, 5-Speed

Top
 Profile  
 
 
 Post subject: Re: Manual EB soon. What do I need to know?
Posted: Mon Sep 27, 2010 7:21 pm 
Smokin em up
Offline

Age: 39

Posts: 251

Joined: 1st Jul 2006

Ride: EBII Fairmont 4.0 206rwkw

Location: Adelaide
SA, Australia

I was leaning towards an Xtreme clutch.
How about rip shifters etc??

What kind've power are you guys producing?

 

_________________

EBII Fairmont = 206rwkw
EL Fairmont = Daily

Top
 Profile  
 
 
 Post subject: Re: Manual EB soon. What do I need to know?
Posted: Mon Sep 27, 2010 7:45 pm 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

shyun wrote:
I do not recommend getting a clutch industries clutch. The one i had had a terrible pedal feel, it soprta felt like there was a lump half way through the travel. I'm not sure if they're all like that but mine was. I have an Xtreme clutch now which has a nice smooth travel and has no trouble dealing with my engine which isn't stock.



Did you replace your spigot bearing (pilot bearing?) and the fork?

I have had no faults at all with mine!

Cheers

ToranaGuy

 

_________________

I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts|

Top
 Profile  
 
 
 Post subject: Re: Manual EB soon. What do I need to know?
Posted: Tue Sep 28, 2010 1:19 am 
Smokin em up
Offline
User avatar

Age: 34

Posts: 236

Joined: 4th Jan 2009

Ride: ED XR6, AUII XR8

Location: Melbourne
VIC, Australia

ToranaGuy wrote:
Did you replace your spigot bearing (pilot bearing?) and the fork?

I have had no faults at all with mine!

Cheers

ToranaGuy


yeah it used to be an auto so the spigot was new. At any rate it was all the same gear, i just got the new clutch and it was fine. Mighta just got a dodgy one :P

 

_________________

ED XR6, LeMans Red, 5-Speed
AUII XR8, Silhouette, 5-Speed

Top
 Profile  
 
 
 Post subject: Re: Manual EB soon. What do I need to know?
Posted: Tue Sep 28, 2010 1:34 am 
Getting Side Ways
Offline
User avatar

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

shyun wrote:
ToranaGuy wrote:
Did you replace your spigot bearing (pilot bearing?) and the fork?

I have had no faults at all with mine!

Cheers

ToranaGuy


yeah it used to be an auto so the spigot was new. At any rate it was all the same gear, i just got the new clutch and it was fine. Mighta just got a dodgy one :P


Maybe, it can happen. I must admit I am yet to see a return thru work, and we sell about 20 kits a week for various cars.

Cheers

ToranaGuy

 

_________________

I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts|

Top
 Profile  
 
 
 Post subject: Re: Manual EB soon. What do I need to know?
Posted: Tue Sep 28, 2010 1:46 am 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 4316

Joined: 30th Oct 2006

Gallery: 18 images

Ride: Envi EF

Location: Grafton
NSW, Australia

I've had a f**k spigot, brand new and it squealed and whistled.

Re ripshifter
gearbox-suspension-brake-driveline-f4/short-shifter-for-t5-s-t95455.html

 

_________________

>>>EF Futura T build<<<

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 80 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 26, 2024 7:40 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names