|
| dahayes |
|
||
|
Hi All,
I hoping this might be easy for someone to answer.Had my speedo faces off last night and when putting it back together realized there is two different length screws. is anyone able to tell me where the short and long ones go? xg spac cluster Cheers and sorry if this is stupid Dan |
||
| Top | |
||
| TimmyA |
|
|||
|
There is 3 different length screws...
The 4 long ones hold the front to the back and go just above the bottom row of light globes... you will notice evenly spaced holes... The 2 medium ones hold the plugs on the back to middle cluster section The large assortment of short ones go everywhere else... Cheers, Tim
_________________ {DESCRIPTION} |
|||
| Top | |
|||
| dahayes |
|
||
|
Sorry Tim i meant the tiny screws that hold the actual dial faces in, any ideas there?
|
||
| Top | |
||
| TimmyA |
|
|||
|
As far as I'm aware they are all the same...
You got the 6 gauge cluster or the 3 gauge?
_________________ {DESCRIPTION} |
|||
| Top | |
|||
| dahayes |
|
||
|
6 gauge cluster. theres not a huge amount of difference in length but enough to matter i think
|
||
| Top | |
||
| TimmyA |
|
|||
|
have you got like 8 short ones and 4 long ones?
Where 8 short ones would make sense the go in the 4 small gauges and 4 long one in the two big gauges? Is it something logical like that?
_________________ {DESCRIPTION} |
|||
| Top | |
|||
| dahayes |
|
||
|
yer im at work now and cant remember how many of each i had.i did try the logical way (short ones for back long for front) but the screws bottomed out before being screwed all that way in
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 20 guests |
