hey guys just wondering what you guys would do.

So the short story goes. Hit a large rock on the weekend and cracked my sump.

Has anyone had this happen to them before and what did you do to fix it..
Weld? Replace? or fix?

How much cash am i gonna have to fork out do you think?

Looks like a big job to get the sump out i recon.
06 BF UTE.
Any Advice would be much appreciated.
Thanks

Hey I used a product called quicksteel its a putty just rough the area with something Sharp and smear it on.

Sets like steel and does a good job.

I had a very similar thing happen in my au

while the alloy can be welded,
depending on the extent of the crack i would say at the least the sump will need to be removed for repair, by either removing the engine or dropping the k frame and suspension and removing the sump from the engine..

if you have the funds? i would replace it with a new or second hand sump...

i fixed my mates commodoore sump - he excavated a boulder while 4wd ing around the place, it was a hairline crack around 40mm long no hole or chunk missing but weeping oil pretty bad.

dropped oil,
cleaned up area with degreaser
background the crack a bit
degreased again
got aluminium wire for my mig set the welder to its highest setting
ran a single very fast run along the crack without depositing much metal (this sealed the crack and stopped the oil dripping through but was nasty as s**t)
cleaned up with grinder and degreaser
ran two more good weavy runs over that

all done and took 1/2 an hour with the car on stands without removing the sump

if youve got the time and money replace the damaged one
if youve got the tools and your a tight a*** repair it using my guide

thanks guys
So the plan is. My brothers mate has a hoist and his doing the work on it for me. picking up a sump from just falcons in kilsyth tomorrow for $85, get that back to me mate then he'll fit it up and it should all be done by Thursday for around $500.

so hope all goes well and we don't run into any trouble.

Could anyone tell me if a 2006 bf standard 6 take the gasket or the silicon stuff to seal up the sump..

thanks again...

All good my cars back on the road again..
so 650 dollars later ive got a new sump with no crack in it .so good. anyway the guy that was working on it also picked up on a cracked engine mount.. does this happen often? I wouldnt say i really thrash the thing but i dont mind giving it a plant every now and then..

Thanks guys