|
| revcore |
|
|||
|
Wondering what the minimum disc thickness is that is required in order for them to pass a roadworthy here in Victoria?
_________________
|
|||
| Top | |
|||
| Krytox |
|
|||
|
Every model is different
ED New 24mm Used 22.2mm pretty easy to look it up.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
Yeah no standard, just depends on the car, get big modern car run good 30+mm
form tiny s**t with mayube 10-15mm don't let them get to thin obviously as the result are interesting when chunk of the rotor dislodge. 
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| revcore |
|
|||
|
Cheers for the replies. The car in question is a '73 V8 HQ one tonner.
_________________
|
|||
| Top | |
|||
| cjh |
|
|||
|
revcore wrote: Cheers for the replies. The car in question is a '73 V8 HQ one tonner. It is cast into the hub...in thousandth's of an inch. If I remember, new is 1.000".....under size is like 0.985" or 0.965".....they are rediculous...something like only 0.040" wear from new to scrap.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| BFXR6T |
|
||
|
24.5mm front.
14.7mm rear. Specs from DBA. But as said above, it's cast into the disc. |
||
| Top | |
||
| revcore |
|
|||
|
Sounds like I'm gonna need new discs for my V8 one tonner
 The discs on my ED are near new (Font and rear discs were replaced only 3 months ago along with new pads and fresh brake fluid).
_________________
|
|||
| Top | |
|||
| TROYMAN |
|
||
|
do they go to the extremes of measuring your rotor thicknes in vic for a roadworthy????
|
||
| Top | |
||
| hans hartman |
|
||
|
TROYMAN wrote: do they go to the extremes of measuring your rotor thicknes in vic for a roadworthy???? they measure tyre depth as well,nothing else to do to kill 8 hrs then do o\t on the rbt potrol.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
TROYMAN wrote: do they go to the extremes of measuring your rotor thicknes in vic for a roadworthy???? You'd hope so. |
||
| Top | |
||
| TROYMAN |
|
||
|
tickford_6 wrote: TROYMAN wrote: do they go to the extremes of measuring your rotor thicknes in vic for a roadworthy???? You'd hope so. in nsw only a brake force test at 40 kmh is required for roadworthy, no rotor measurements ect.. |
||
| Top | |
||
| Krytox |
|
|||
|
Vic doesn't require a annual Roadworthy.
so when we need them they actually look at the car.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 51 guests |
