|
| Fordsrule174 |
|
||
|
Im just wondering if EA EB ED LSD diffs will bolt into my NF
if not would it be possible to swap there internals to make a LSD that will bolt on or if there is another way to achieve this i ask due to i have a m8 in town who has enough EA EB ED's to go around and i can most likely easily get a LSD from him for cheap and would a 9" diff be any better than a LSD as people clearly spend big $$ getting them and chasing them
_________________ NF Fairlane Ghia, Brand New Leather Interior, Wallnut All Through, 800W RMS JL Audio Sound System, Lowered King Springs And Monroe GT Shocks, Custom BA/GT Air Intake, Holley Highflow, Simmons B45's, Going To Be Supercharged At 9-12psi With Stage 4 Head And Cam With Pacemakers And 3" Exhaust |
||
| Top | |
||
| Linkachu |
|
||
|
The only difference between EA-D and EF-L diffs are the hand break set up. You just have to modify that and it bolts strait up.
There will be a tut on here somewhere telling you how to do it. |
||
| Top | |
||
| TROYMAN |
|
||
|
Linkachu wrote: The only difference between EA-D and EF-L diffs are the hand break set up. You just have to modify that and it bolts strait up. There will be a tut on here somewhere telling you how to do it. you will also find ea and series 1 eb have 25 spline axles and a different pinion flange.. like the xf.. where eb2 onwards have 28 spline axles.. (much better).and a decent pinion flange.. |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
my EB1 had the EB2 pinion flange and 28 spline axles. so whats the deal?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
WILDEB wrote: my EB1 had the EB2 pinion flange and 28 spline axles. so whats the deal? i probably should have mentioned series1 3.9 eb has 25 spline axles and the s**t ea flange.. is or was yours 4.0 or 3.9???? |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
mine was originally a 3.9. but had the 28 spline EB2 flanged diff. but the EA style lower trailing arms
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| TimmyA |
|
|||
|
might have got the model right on the changover?
They may have run out of 2 pinion diffs earlier than they thought so yours got the first of the 4 pinion diffs but they still had early trailing arms left? Funny things like that ^^^ always seemed to happen with the e series models... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Fordsrule174 wrote: Im just wondering if EA EB ED LSD diffs will bolt into my NF if not would it be possible to swap there internals to make a LSD that will bolt on or if there is another way to achieve this i ask due to i have a m8 in town who has enough EA EB ED's to go around and i can most likely easily get a LSD from him for cheap and would a 9" diff be any better than a LSD as people clearly spend big $$ getting them and chasing them As mentioned already, early e series have a different hand brake setup and the diff needs to be modified to adapt yours... You can swap the internals yes... But be aware this requires the diff to be set up and re-shimed (1 thou of difference will decider between whether your gear eat each other or work correctly...) So unless you have all the sized shims, or access to them, the know how of what you doing (setting preloads, backlash, and gear rub pattern), and the tools like diff spreader and the special flange holding tools and that, its not really a backyard task... If you do go that way you may as well put a 3.45 ratio or higher in at the same time and get it all shimed to in one go... Not sure what a transmission would charge you for this... Depends how many goes it takes before they get the shims right I guess... A 9" diff is stronger... They are in high demand and expensive because they aren't all that common... And people making race cars, or more specifically drag cars want them for their bigger axles, stronger larger gears and stronger hemisphere (or spool in the case of a drag car)... They are bloody massive and heavy... I reckon unless you had mountains of grunt, the 9" would use a fair bit of engine power just to get it spinning being so heavy yeah? Wouldn't be best on a NA motor... I bet you'll break a transmission before you break a properly set up Borgwarner diff... The 8.8" diff isn't that bad... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| TROYMAN |
|
||
|
like tim said, some do have the different flanges, i guess it comes down to the date built and build numbers..
either way when ever changing diffs try getting one from eb2 or later this save getting a mixed bag of ea and eb bits... |
||
| Top | |
||
| BenJ |
|
||
|
In addition, the EB-ED diffs don't have the needed hand brake mounts/brackets etc. You will need to weld them on if you use an older diff.
Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
mine is a september 91 build. when was the changeover?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| effalcon94 |
|
||
|
hey guys, since mines a 91 series one eb ghia would it be easy for me to put 3.45 gears in? could it be a straight swap?
cheers anthony |
||
| Top | |
||
| TimmyA |
|
|||
|
effalcon94 wrote: hey guys, since mines a 91 series one eb ghia would it be easy for me to put 3.45 gears in? could it be a straight swap? cheers anthony read my post above...
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| devil's EL SPRINT |
|
||
|
BenJ wrote: In addition, the EB-ED diffs don't have the needed hand brake mounts/brackets etc. You will need to weld them on if you use an older diff. Cheers BenJ has any one got a tech doc on this |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 83 guests |
