|
| data_mine |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Factory fitment on those rims is 245/35/19. 235 will fit, but may look a tad skinny, depending on brand. Maxxis Z1 is a reasonably priced tire in that size that is actually quite good for the $$$. "Factory" is a bit subjective here.... considering E series didnt come out with 19"s. 235 or 245s would be fine, I was just suggesting the one that would keep the speedo most accurate. As for the Maxxis Z1's, I actually have those in 245/45/18 on the front of my EF, and they are in fact a very good tyre. They came with the rims when I bought them so I went to check out the price for replacements one arvo, from what I can remember they were cheap as too. Maybe so, but the 245/35R19 is a standard size, so the tyres are easier and cheaper to get (try find a 235/35R19). 235/45R17 is also a standard size, going to the 245/35R19 will work fine. there's bigger all speedo difference between those two. As already said a 1.6-1.7% difference.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| effalconxr6 |
|
||
|
thanks for all your help. just figured it all out and bought 4 brand new 245/35/R19 for $400
_________________ EF XR6, Red in colour, T5 with short shift, tired LSD, Pioneer head unit, 2.5 exhaust with staino pacemakers, 68mm TB, dumped on ultras, sitting on FTR's with EL bodykits |
||
| Top | |
||
| fairlane6970 |
|
|||
|
{USERNAME} wrote: As for the Maxxis Z1's, I actually have those in 245/45/18 on the front of my EF, and they are in fact a very good tyre. They came with the rims when I bought them so I went to check out the price for replacements one arvo, from what I can remember they were cheap as too. I tried to fit 45 Series 18's on my NF but the 245/40's were that close to the upper balljoint i have to remove the grease nipple! So 45's were a definite no-go - must be different offsets or something!
_________________
|
|||
| Top | |
|||
| krisisdog |
|
|||
|
I have 35mm spacers with B series 18x8s. Its close, but thered be 5mm + clearance I think.
|
|||
| Top | |
|||
| data_mine |
|
|||
|
{USERNAME} wrote: thanks for all your help. just figured it all out and bought 4 brand new 245/35/R19 for $400 each or $400 all up? If so what cheap a** crap are they?
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| arm79 |
|
|||
|
{USERNAME} wrote: I tried to fit 45 Series 18's on my NF but the 245/40's were that close to the upper balljoint i have to remove the grease nipple! So 45's were a definite no-go - must be different offsets or something! Different ball joints stick out of the spindle more than others. I found the factory ones stick out more, so offer less tire clearance... Whereas some of the aftermarket ones stick out less. I put some TRW ones in my EL, and got around 4 or 5 mm extra clearance. So this is a way of safely adding taller rubber. {USERNAME} wrote: each or $400 all up? If so what cheap a** crap are they? Sounds like all up. Obviously doesn't like himself or his car. 
|
|||
| Top | |
|||
| fairlane6970 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: I tried to fit 45 Series 18's on my NF but the 245/40's were that close to the upper balljoint i have to remove the grease nipple! So 45's were a definite no-go - must be different offsets or something! Different ball joints stick out of the spindle more than others. I found the factory ones stick out more, so offer less tire clearance... Whereas some of the aftermarket ones stick out less. I put some TRW ones in my EL, and got around 4 or 5 mm extra clearance. So this is a way of safely adding taller rubber. {USERNAME} wrote: each or $400 all up? If so what cheap a** crap are they? Sounds like all up. Obviously doesn't like himself or his car. Thanks for the heads up on the ball joints! but I won't tell you I just got a set of 235/40/18's new fitted for $360!
_________________
|
|||
| Top | |
|||
| effalconxr6 |
|
||
|
$400 all up. i got them off ebay. they are gemstones
_________________ EF XR6, Red in colour, T5 with short shift, tired LSD, Pioneer head unit, 2.5 exhaust with staino pacemakers, 68mm TB, dumped on ultras, sitting on FTR's with EL bodykits |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
