Hi,

I have a project coming along
im twin turboing a 302 Windsor

i was wondering what ill need for parts

i can get the twin turbo kit with all the piping and intercooler
and i have a standard 302 windsor EFI

i was wondering what ill need to run for all the parts Ignition Fuel and anything else

I was wanting to run around 7-10 PSI each turbo

if you can please tell me a price and what ill need for parts and where i can get them at a good price

Its will b going into me XC gs rally pack with a C6 auto 9 inch dif
there is no a/c just p/c
thanks

Last edited by XCgsRally on Tue Nov 23, 2010 10:11 pm, edited 1 time in total.

injector
fuel pump (depending on what fuel pump you use, a surge tank)
regap plugs to .8mm
tune

I'm assuming your ditching the MAF? so ECU

Yes ill be ditching the MAF

Do you have a idea for any places to get a good ecu, injectors, pistons and anything else il need

And would there be anything else needed

I will write a list of the parts i have in the twin turbo kit tomorrow as well

You could run a blow through maf calibrated for boost and 36Lb injectors..
http://forums.corral.net/forums/showthr ... ?t=1266107

http://forums.corral.net/forums/forumdi ... e=30&f=323
Run 4* timing. Colder plugs..
Better fuel pump..
If it pings a Moates quarter horse tuner ??
http://www.moates.net/quarterhorse-for- ... l?cPath=63
Don't let it ping while on load !!!