Fitting A trip computer from an EBII Fairmont to an ED XR6.

Home » Forums » Fordmods Tech » Interior Modifications

Page 1 of 1 [ 10 posts ]

Post New Topic Post Reply

Previous topic Next topic

xr6guy87

Post subject: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sat Nov 27, 2010 7:38 pm

Fordmods Newbie

Offline

Age: 37

Posts: 7

Joined: 27th Nov 2010

Ride: ford ED XR6

Location: Ipswich
QLD, Australia

I am in the process of trying to fit a trip computer from an EB Series 2 Fairmont into an ED XR6 I am most of the way there atm from what I can tell the range function works and the average KPH work. But I cant get the Instant or average Litres per 100 to display properly at idle it displays 1.0 instead of 99.9 and when driving I cant get it to move off that. I am trying to work off both a max ellery and a gregorys manual but they're not all that helpful.

any suggestions?

Top

Profile

ToranaGuy

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sat Nov 27, 2010 7:47 pm

Getting Side Ways

Offline

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

Doesn't it use the injector pulse from the ecu to work out the L/100 & instant economy? Where are you getting the signal from?

Cheers

ToranaGuy

_________________

Top

Profile

xr6guy87

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sat Nov 27, 2010 7:56 pm

Fordmods Newbie

Offline

Age: 37

Posts: 7

Joined: 27th Nov 2010

Ride: ford ED XR6

Location: Ipswich
QLD, Australia

I believe it displaying 1 might be its way of saying no signal at all. Do you know what colour wire I should be looking for to make that connection to the ECU to see the injector response?

Thanks

Tim

Top

Profile

ToranaGuy

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sat Nov 27, 2010 7:58 pm

Getting Side Ways

Offline

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

xr6guy87 wrote:

I believe it displaying 1 might be its way of saying no signal at all. Do you know what colour wire I should be looking for to make that connection to the ECU to see the injector response?

I can't say that I do, but I think there was a tech doc on there that had a step by step with that info in it?

My Eb2 Ghia & Eb 1 Xr8 both have trip computers, and the EB2 Xr8 will be plug & play as I'm fitting a high series dash loom & climate control to it anyway...

Cheers

ToranaGuy

_________________

Top

Profile

xr6guy87

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sat Nov 27, 2010 8:14 pm

Fordmods Newbie

Offline

Age: 37

Posts: 7

Joined: 27th Nov 2010

Ride: ford ED XR6

Location: Ipswich
QLD, Australia

Tech document on here?

Top

Profile

dazza027

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sat Nov 27, 2010 8:19 pm

Getting Side Ways

Offline

Age: 47

Posts: 524

Joined: 15th Aug 2010

Ride: Territory SX TX

Location: Townsville
QLD, Australia

To fix error with trip computer using EL computer (EEC V), you need to cut the wire on pin 34 on the ecu and splice the loom end (wire from trip comp) into pin 58 pwm injector pulse...this will fix the trip comp.

Took that from my notes for the BBM conversion. Im not sure if it is the same for EEC IV.
Looking in my manual for EA ED the wire from the ECU to the trip computer is GRN/YEL.

Top

Profile

ToranaGuy

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sat Nov 27, 2010 8:43 pm

Getting Side Ways

Offline

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

xr6guy87 wrote:

Tech document on here?

Yep, up next to search is the resources, from there, drops down a menu with tech doc's some of the fordmods guys have written up. Like this one.

documents.php?d=82

Cheers

ToranaGuy

_________________

Top

Profile

xr6guy87

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sat Nov 27, 2010 11:22 pm

Fordmods Newbie

Offline

Age: 37

Posts: 7

Joined: 27th Nov 2010

Ride: ford ED XR6

Location: Ipswich
QLD, Australia

thanks guys ill give it a go.

Top

Profile

xr6guy87

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sun Nov 28, 2010 10:48 am

Fordmods Newbie

Offline

Age: 37

Posts: 7

Joined: 27th Nov 2010

Ride: ford ED XR6

Location: Ipswich
QLD, Australia

yup tech document was awesome guys that got it working perfectly

Top

Profile

ToranaGuy

Post subject: Re: Fitting A trip computer from an EBII Fairmont to an ED XR6.

Posted: Sun Nov 28, 2010 4:00 pm

Getting Side Ways

Offline

Age: 42

Posts: 4125

Joined: 8th Dec 2004

Gallery: 25 images

Ride: EB2 Ghia,Mighty Boy,Eb1 Xr8 5spd

Location: ** In the Shed! **
VIC, Australia

xr6guy87 wrote:

yup tech document was awesome guys that got it working perfectly

Good stuff. Glad to read that.

Cheers

ToranaGuy

_________________

Top

Profile

Post New Topic Reply

Page 1 of 1 [ 10 posts ]

Jump to:

Home » Forums » Fordmods Tech » Interior Modifications

Who is online
Users browsing this forum: No registered users and 54 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

It is currently Mon Nov 18, 2024 3:34 pm

All times are UTC + 11 hours