Hi peoples,

Can you please help me out? The night before the big cruise and someone decides to re-wire their LPG system

Anyways, finished wiring in the AMS and the car started fine. So i thought great. Put the cables through the carpet to underneath the seat, bolt in the AMS and put seat back. Looks all good and dandy. As an after thoguht, i thought i will just check to see if the car will start and no it wont

It is like the inhibator switch is not working.. Well if it were an auto that is. No sound when trying to start apart from the starter relay kicking in.

The lights stay on, on the dash but the acc goes off as if it is trying to start. On occasions, the temp gauge is showing full but more often than not it does not move (like it should). I have done all the usuals and checked all the fuses and they are all ok.

Could maybe i have blown a fusable link somewhere? If so whioch one? I know it is a long shot but unfortunally i do not have a multimeter here If i bridge the starter motor, the motor turns and the fuel pump is working as i can smell fuel as it is flooding the engine

Any ideas? oh and it is an EF

Thanks

Last edited by comhelp on Sat Dec 11, 2010 1:41 am, edited 1 time in total.

ok please ignore this post

I must have been half asleep and forgot to plug back in the C22 connector

Would have to be the last thing i checked I even got an old pc fan to use as a 12V meter